Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

Related Topics:

Question about Hotpoint 24 in. FDW60 Free-standing Dishwasher

2 Answers

FDW20P Error lights.

My 2 year old FDW20P is flashing lights 2(wash) and 4(dry). Does any body know what this error code stands for? Thanks.

Posted by Bish Bash on

Add Your Answer
  • STEPHENS373 Sep 26, 2008

    my fdw20 has flashing lights 2 wash and 4 drying what does this mean?

×

Ad

2 Answers

Anonymous

To raverbaby. Have tried following all your links to the torrent but can't get it are you sure there are any senders?

Posted on Apr 16, 2007

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Hot-Shot:

    An expert who has answered 20 questions.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 59 Answers

Hiya, i have the same problem. I am getting mine repaired on the 16th Next monday Booked an appointment with Hotpoint there coming to see and fix it. I will ask about the flashing lights and if you keep in contact i will let you know Ok"

Posted on Apr 09, 2007

  • 1 more comment 
  • Anonymous Apr 09, 2007

    Hello again,

    JUST FOUND this on the internet may solve your problem!


    DISHWASHERS


    E10 - Fill or empty time out. Check that the hoses are not kinked, that the taps are on or whether the drain pump or hose is blocked.
    E11 - Heater timed out. The heater has not reached the required level in a certain amount of time.
    E20 - Temperature under range. Book an engineer.
    E21 - Temperature over range. Book an engineer.

    see if that works

    RAVERBABY!! HTID

  • Anonymous Apr 12, 2007

    Basher YOUR going to be so happy with me!

    I have got the Handbook for the dishwasher & i have hosted it on a torrent site for ALL TO GET! AND SEE, CLICK THIS LINK - TO DOWNLOAD.
    http://www.mininova.org/get/658793

    -----------------------------------------------
    ALL I ASK IN RETURN TO ALL OF YOU FIXYA.COM PEOPLE, IS PLEASE SEED THIS FILE SO OTHER PEOPLE GET DOWNLOAD IT - SHARE IT FOR AS LONG AS YOU CAN!!
    -----------------------------------------------

    If you don't know about torrents this is what they are.

    Free, open source file-sharing application effective for distributing very small & large software and media files Video files ect.... Documentation, search-engine.
    ----------------------------------------------

  • Anonymous Apr 14, 2007

    Hiya people SORRY had a little trouble hosting this torrent (If ne 1 tried to download It now working I'm seeding at unlimited rate) So you will get it in no time - Tracker says there is 5 seeder's onhttp://www.isohunt.com Cheers to all you seeders KEEP UP THE GOOD WORK

    RAVERBABY!!!! KEEP IT HARDCORE Htid

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

The panel is stuck on pots/pans for cleaning and wont let me run the dishwasher. the pots/pans light keeps flashing
Hello,

To reset the dishwasher push in this order the,

HIGH TEMP WASH- HEATED DRY- HIGH TEMP WASH- HEATED DRY - CANCEL/OFF

the control will be reset...but more importantly how many times in a row does the light flash..it will indicate what error code its displaying??

example if it flashes 4 times then a pause then flashes 4 times again its displaying the error code#4
7 flashes then pause then 7 flashes its displaying the error code#7 ect ect



GENE
Read full answer
Sep 06, 2011 • Whirlpool 24 in. DU1055XTPS Stainless...
tip

What to do to get your Whirlpool dishwasher to start when the light keeps...
<span>Hello,<br /><br />To reset the dishwasher push in this order the,<br /><br />HIGH TEMP WASH- HEATED DRY- HIGH TEMP WASH- HEATED DRY - CANCEL/OFF<br /><br />the control will be reset...but more importantly how many times in a row does the light flash..it will indicate what error code its displaying??<br /><br />example if it flashes 4 times then a pause then flashes 4 times again its displaying the error code#4<br />7 flashes then pause then 7 flashes its displaying the error code#7 ect ect<br /><br /><br /><br />GENE</span>
Read full tip
on Sep 06, 2011 • Dishwashers
1helpful
1answer

My Whirlpool GU2400XTP83 stopped during the wash cycle and there is a blinking light above the "light" cycle button. I can not reset the dishwasher, stop or start it.
Hello,

To reset the dishwasher push in this order the,

HIGH TEMP WASH- HEATED DRY- HIGH TEMP WASH- HEATED DRY - CANCEL/OFF

the control will be reset...but more importantly how many times ina row does the light flash..it will indicate what error code its displaying??

example if it flashes 4 times then a pause then flashes 4 times again its displaying the error code#4
7 flashes then pause then 7 flashes its displaying the error code#7 ect ect



GENE
Read full answer
Sep 05, 2011 • Whirlpool 24 in. GU3200XTP Built-in...
2helpful
1answer

I have a kitchen-aid dishwasher model # KUDio1ibl6 and it will not come on and the clean light flashes 7 times then pauses and blinks 7 time again. Do you have any Idea what this code stands for I do not...
Hello Asa,

The light blinking seven times is a error code specifically it's error #7 .The E-7 error indicates the part called the flow meter is bad. To clear that error code and get the dishwasher to start push within 3 seconds
HIGH TEMP WASH -HEATED DRY-HIGH TEMP WASH- HEATED DRY

then push CANCEL sereval times to dishwasher shuts off..it should start and run then

If the blinks 7 times again the flowmeter will need to be replaced

ON some models the "HIGH TEMP WASH" button is labled power scrub instead of high temp wash
so in that case push POWER SCRUB-HEATED DRY-POWER SCRUB-HEATED DRY then cancel as described above

In case the E-7 error returns and the flowmeter needs to be replaced the part number for it is W10195536

Gene
Read full answer
Aug 24, 2011 • KitchenAid 24 in. KUDI01FLSS Stainless...
5helpful
2answers

Washer will not start. "Clean"
Hello & Welcome to FixYa

Flashing light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

Please get back to me if you have any other questions.

Kevin
Read full answer
Jun 20, 2011 • Dishwashers
0helpful
1answer

Indesit wd12 (old) timer just goes round without stopping. door light flashes 9 times, help!
Hi, this is the list of the Indesit wd12 error codes...
Error codes and their meaning..
f01 light 4, motor triac f02 light 3 motor, jammed/ tacho f03 lights 3&4 Ntc fault f04 light 2. pressure sw stuck on empty f05 lights 2&4, pressure sw stuck on full f06 lights 2&3, N/A? f07 lights 2&3&4 heater relay f08 light 1. heater relay f09 lights 1&4 eprom/setup error f10 lights 1&3, pressure switch not sensing f11 lights 1&3&4, pump/draining error f12 lights 1&2, communication error f13 lights 1&2&4, dryer ntc/ fan motor f14 lights 1&2&3, dryer heater f15 lights 1&2&3&4, dryer heater relay f16 N/A f17 light 4, door lock f18 light 3 comms error (3 phase motor) power board

Door flashing 9 times means 1&4 eprom/setup error
Read full answer
Dec 20, 2010 • Washing Machines
0helpful
1answer

Error code 105
The control should flash this error code if it cannot detect the lid switch opening and closing properly.
This error code may also be used if there is a disagreement between the motor and machine controllers on the state of the lid switch.

The control should not allow the unit to run in this condition. This code will also appear if the user presses the START key while the lid is open.

Open the lid or press STOP/CANCEL to clear the display

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Read full answer
Jan 29, 2009 • Washing Machines
1helpful
1answer

Error code DR
Pull the tech sheet out of the dryer ( behind the lower front access panal ). The lights flashing are trying to tell you a fault code.

A copy:

MODEL DIFFERENCES: • Better models have a digital readout display
• Good models do not have a digital readout display
READING ERROR CODES 1. Position cycle selector knob to the 3 O’clock position.
2. Press and hold the Select and Pause Cancel buttons simultaneously for six seconds.
3. Immediately after, press and hold the START and Pause Cancel buttons simultaneously for 4 seconds.
4. Rotate the cycle selector knob to the 2 O’clock position.
On better model dryers, the error code will appear in the digital display. On good models, the five indicator lights of
Drying, Cool Down, Wrinkle Rid, and Clean Lint Filter Spin will flash the number of times for the first digit of the code
and the START indicator light will flash the number of times for the second digit. Take separate counts of each indicator
light, then repeat to confirm in order to be accurate in identifying the proper error code. The code is obtained by counting
the number of times the lights flash. Example E24: The five indicator lights would flash twice indicating the 2 and the
START indicator light will flash four times indicating the 4. The five indicator lights and the START indicator light start
flashing at the same time. The control will pause for 2 seconds, then repeat the code.
Note: A letter appearing in the code stands for a number higher than nine.
A = 10 B = 11 C = 12 D = 13 E = 14 F = 15
Example Code E4A: the first digit would be 4 and the second digit would be 10. If this code would appear on a dryer in
the Good model line, the five indicator lights would blink four times and the START indicator light would blink ten times.
Troubleshoot problem by using chart below.
To move on to the next code, press the OPTIONS button. To clear code, press the Select button.
To exit this mode, simultaneously press and hold the Select and Pause Cancel buttons for six seconds.

jeff.
__________________
http://www.applianceaid.com/
Appliance Repair Aid
http://www.jrappliance.ca
JRAppliance
Read full answer
Jan 10, 2008 • Frigidaire AEQ7000ES Dryer
2helpful
1answer

Hotpoint fdw20p dishwasher
You need the control panel to reset before anything else can happen. To do this TURN OFF THE PLUG SOCKET FIRST AND UNPLUG. Then you need to drain ALL the water from the machine. Turn off the water supply feed and place the wastage pipe as low to the floor as poss ( 1-2" off floor). Water will gush out so use a large shallow tray and keep emptying the tray. Tilt the dishwasher over slightly to make sure all the water is out.
This will allow the control panel to reset itself which wouldn't normally happen if the base of the dishwasher was holding even a small amount of water.
Re connect the water, plug back in , select the RESET setting on the dial and close the door and switch on.
Leave for about 20 seconds and then turn off.
Rotate the selector switch to "A" Intensive wash and switch
I found this on another site and it really did work for me
Read full answer
Dec 12, 2007 • Hotpoint 24 in. FDW60 Free-standing...
0helpful
1answer

NOT WORKING FDW20p What does it mean
Hold the start key down and it should re-set . Please Rate This ! Thanx!!
Read full answer
Apr 08, 2007 • Hotpoint 24 in. FDW60 Free-standing...
Not finding what you are looking for?

View Most Popular

24 in. FDW60 Free-standing Dishwasher

  • Dishwashers

Related Question

The panel is stuck on pots/pans for cleaning and wont let me run the dishwasher. the pots/pans light keeps flashing

  • Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

Open Questions:

0answers

3rd and 5th lights flashing machine starts then stops when 3rd and 5th lights starts flashing
Read full answer
Be the first to answer Feb 10, 2015 • Hotpoint 24 in. FDW60 Free-standing...
0answers

fdw60flashing neon lights 40cand45c n

Read full answer
Be the first to answer Oct 06, 2014 • Hotpoint 24 in. FDW60 Free-standing...
0answers

Currys essential dishwasher CDW60W13 not getting pots clean has rinse aid, salt and tablet in? pots not coming out clean, even though have salt, rinse aid and tablet
Read full answer
Be the first to answer Jun 18, 2014 • Hotpoint 24 in. FDW60 Free-standing...
0answers

how to drain internal water tray
Read full answer
Be the first to answer Jun 13, 2014 • Hotpoint 24 in. FDW60 Free-standing...

See all Hotpoint 24 in. FDW60 Free-standing Dishwasher Questions

Related Topics

725 views

Ask a Question

Usually answered in minutes!

Popular Questions

Salt light stays on all the time -salt is full

Hotpoint Dishwashers

FDW60 flashing 'eco' light error

Hotpoint 24 in. FDW60 Free-standing...

Dishwasher tripping the circuit breaker

Hotpoint 23 in. BF50 Built-in...

Currys essentials dishwasher CDW60W10 light flashes which indicates filter blocked or hose kinked according to the manual, but these are OK how do I stop the light flashing and retart the machine?

Hotpoint 24 in. FDW60 Free-standing...

Fails to start Midea dishwasher WQP12-9240AS

Hotpoint 24 in. HDA3400G Built-in...

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

27 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Brad Brown

Level 3 Expert

19107 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Manual. user-manual-24 in. FDW60...

24 in. FDW60...

PDF Manual
Manual. user-manual-24 in. FDW60...

24 in. FDW60...

Loading...