Question about Kenmore Dryers
Your moisture sensor is not detecting the moisture levels in the dryer, this may be a simple matter of lint on the sensor of could be a faulty sensor.
Posted on Mar 06, 2012
On auto dry cycles, the cycle is controlled by moisture sensing bars located on either the rear or front bulkhead, ( visible inside dryer ) if the moisture sensor bars are shorted together (normally by wet clothing) the dryer will continue to run. If the dryer continues to run when the clothes are plenty dry, check and see if there is anything stuck between the sensor bars, (sometimes a metal sequin will cause this) or see if they are damaged. If not, you may have a problem with a timer contact, if the timer advances and stops moving at the same spot each time, I would suspect the timer. If this is an EvenHeat dryer, examine the control board located to the right of the timer in the control panel, for any burned components. Hope this helps.
Posted on Sep 15, 2008
Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.
This link, http://www.repairclinic.com/SmartSearch/SmartSearch.aspx, provides exploded view imagery, belt routing diagrams, parts imagery and function, parts ordering and shipping information, error code details, just about anything you need to get your appliance up and running again. Just follow the links to navigate through the site.
You will need to enter the model number stamped on the manufacturers product information data tag, located on the unit, and not in the User’s Manual. to access your product information.
Here are some common solutions to help resolve the issue with your appliance:
If your dryer seems to run forever, it could be because of a clogged vent or internal ductwork. Your dryer may have an automatic cycle that turns off the dryer when the clothes are dry. It does this with a special thermostat or moisture-sensing system.
Normally, this is what happens during an automatic cycle:
If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Dave E. (Illeagle)
"Your satisfaction is my personal reward"
Posted on Jul 09, 2008
sounds like the timer is not completing the cycle in this mode will the dryer shut off if you manuelly advance timer in that mode
Posted on Nov 01, 2008
if your thermal fuse is blown you will not recieve heat. if you put your dryer on sense load it will keep running because it is not sensing that the clothes are getting dry which in return your timer does not
Posted on Jun 20, 2009
Tips for a great answer:
Nov 02, 2015 | Maytag Centennial 7.0 Cu. Ft. Super...
Dec 20, 2013 | Amana ALE643RB Electric Dryer
Mar 12, 2011 | Dryers
Mar 05, 2011 | Whirlpool LER4634J Electric Dryer
Apr 20, 2010 | GE DWSR483EB Electric Dryer
Jun 20, 2009 | Whirlpool LER5636P Electric Dryer
Jun 24, 2008 | Whirlpool LER5636P Electric Dryer
Apr 24, 2019 | Kenmore Dryers
213 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: