Canon PowerShot SD100 / IXUS II Digital Camera Logo

Related Topics:

Question about Canon PowerShot SD100 / IXUS II Digital Camera

1 Answer

Doesn't work. There is no problem with camera on and off. But that's it, doesn't do anything. Can't take a picture or can't go to the menu. I can say camrea doesn't work. I don't know what is wrong...

Posted by sara pyun on

  • kimblair Nov 19, 2007

    EXACTLY, it just doesn't work. It will turn on and off and display the last photo taken but that it is. Will not take pictures, cannot view any other photois than the last one taken. Cannot use any of the functions keys, no menus will open. It seems to be LOCKED.

  • keith15 Jun 06, 2008

    Hi guys,

    I have a cannon Ixus 3.2mp camera which turns on ok and shows the Cannon logo perfectly, but when the display is operated prior to taking shots the screen shows a picture that is drawn out length ways, is mainly various shades of pink and is out of focus.

    This is the picture that is captured and stored, I have tried all the basic settings, tried different sd cards, switched on/off numerous times. It seems to be a processor or firmware problem, any help or ideas much appreciated.




1 Answer


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Its locked

Posted on Jun 04, 2008


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Dropped kodak cx7530, lcd display doesn't work, lights up but no picture

see the video instructional and proceed with common sense and logically. God bless you

I went from XP to windows 7 64 bit and now my cyber-shot camera is not recognized when I try to download pictures. Sony couldn't figure it out.

If you connect CyberShot Camera from a USB Cable, check the cable once. If that doesn't solve the problem, Choose Mass storage option from the Camera Menu when prompted. I think it should work.

The pictures were too bright

Try to reset the camera to the original settings to see if that sovlves the probem.
I think its under Menu then Tools then scroll to Reset. If that doesn't work then
you have a Lens malfunction.

I have a J10 fujifilm camera and it currently has an error message: FRAME NO. FULL! I have the following picture card: Fujifilm xD xD-Picture Card M1GB Any advice would be appreciated.

Try formatting the memory card. If that doesn't work, try a different memory card. If that doesn't help, sadly, it's probably time to return the camera if it's still under warranty.

Good luck!

Blured picture outcome

Try resetting the settings in the camera's menu. If that still doesn't work then you'll have to get your camera serviced by an authorized Nikon service center. If the camera is less than a year old you may still be covered by the manufacturer's warranty.

Photo Tech Repair Service
110 East 13th Street
New York, NY 10003

The menu screen is on and we can not take pictures, we can not get out of that setting

Hi, If it won't let you quit out of the menu screen I'd suggest turning the camera off then on, if that doesn't work take the battery out for a couple of minute and that should do the trick.

I took 850 pictures but T I can see in the camera only 180. Do you know what is happening?

I think you will have to reformat your memory card.
To do this:
  1. Copy all the pictures from the camera onto your computer.
  2. With the camera on, and the memory card inserted, press the menu button.
  3. Highlight "Setup"
  4. Go to "Format"
  5. Select "Yes"
After this is complete, if it still doesn't work, your memory card is defective and you must buy a new one.

When I turn my camera on, the lcd doesn't display. I can review an image though in the play mode. any ideas??

Rebel XT doesn’t have live view function. You cannot have picture on LCD when taking picture. If you can review the pictures and operate menu on LCD, your camera just fine.

Button don't work

One of the buttons is constant presset in.
Under the button is a metal membrame, sometimes it happens by to mutch force the membrame is defect, it doesn't popup again.
Try to find out witch button doesn feal good anymore, can you work without it ?(for example left macro), open camera and remove membrame.
LKet it repait by fuiji ? a least € 100,-.more than new....

How Do I load Pictures to My Computer with this Camera?

These appear to the the manual link and the driver link from the website
Manual Link

Driver Link
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2406 Answers


Level 3 Expert

13435 Answers

David Shaub

Level 3 Expert

2994 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides