The problem started by the TV becoming difficult to turn on but after several atempts with the remote it would come on but it would be on an empty channel. Eventually it got to the point where now when you try to turn it on you get three flashes of the green light as if it might come on but it never does.I tried turning it on manualy, new remote batteries, and unplugging and replugging in the TV again,with no luck. Can you help me please?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like the door lock rod has become detached from the lock rod actuator. The plastic retainer clip that holds it in place can become dislodged causing them to separate. Fixing this problem is not that difficult but, it does require removal of the inner door panel.
This Web page should allow you to find the codes for any devices you want to add for this remote.http://remotefinder.rca.com/default.aspx?site=rca Other than that there is an easy way to program this remote. 1. Turn on the device by hand. 2. Hold down the device name key.(hold the TV button to program a TV) 3. While holding down this key also hold down the power key until the red light turns off and comes back on. Then release both buttons. 4. From here hit the power button repeatedly until the device turns off. 5. Hit the stop key at the bottom. Now the remote is programmed for that device.