Philips 9P6031C 60" Rear Projection Television Logo

Related Topics:

Question about Philips 9P6031C 60" Rear Projection Television

2 Answers

Picture problem Turned it on the other day and the picture was dissappearing and coming back like it was being turned on and off, only it wasn't being turned on and off. After a few minutes of being left on the picture will stabilize with concave edges on all 4 sides and the picture is 2/3 the screen size. Also the picture has red,blue and green shadows. The sound is fine but intermitantly it will get loud for a second or two and then resume normally. Can anyone tell me what parts I can replace to correct this ?

Posted by dan deni on

Ad

2 Answers

Edward

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 3,459 Answers


If your screen keeps shrinking and expanding its typicaly the opto chip. You can get the chip and repair instructions from www.TvRepairKits.com . This is a fairly common problem.

Posted on Dec 18, 2008

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

First start off by replacing the convergence IC. They are soldered into place, so if you dont know how to unsolder and solder on printed circuit boards, you should ahve a pro assist you. They start with STK and they stand up on a metal heat sink. Also you may need to check around in the sweep supply for leaky capacitors. This set is common for them but not any in paticular

Posted on Sep 16, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Samsung dlp hl55679w

It sounds that the light engine has the fault. Contact the authorizes service center for Samsung.
0helpful
1answer

I have a Hitachi 50GX49B, when I turn it on red light on panel comes on, but no picture or sound. 4 weeks ago picture would come on, but would break up and dissappear until warmed up, this took about 2-3...

if you bang on the TV or try kicking the very center bottom of the tv and it works or flickers you got a loose solder connection somewhere on the board. I got the same problem. When it warms up the solder, around what ever pin it might be, makes better contact. I am looking into the problem and will post my finding when i figure it out.
0helpful
1answer

Messages deleted when phone is turned off

You must have cleared photos and videos. however, many people do not realize that an accidental audio recording can use up all the disc space. So check for extra large audio files.
0helpful
1answer
0helpful
1answer

No picture just sound

Your projection tubes are messed up. It's a very expensive fix, just get a working TV off craigslist with a smashed screen and reuse your screen itself (usually 100-200$) or just toss the TV and upgrade to an LCD
4helpful
1answer

Information displayed over picture on screen

If you press the magnifying glass button when in playback mode, the data dissappears. I don't know if that fully answers your question, though.
0helpful
1answer

Recent problem with picture

Plasma Tv panel only have a lifetime of 10000 hours. the phosphor inside the panel and the zenon, xenon gas only will last so long . Pretty much like a florescent light bulb.
0helpful
1answer

No picture, but power light is on

THE POWER SUPPLY OF YOUR TV WAS THE PROBLEM,YOU COLD SOLDER THE MAINBOARD OF YOUR TV,AND THE CRT SOCKET CONNECT TO THE TUBE IS ALSO COLDSOLDER,.
0helpful
1answer

Sometimes no picture on RCA tv

its nothing really, if your tv is new then it is normal but if it continued to do it then its broken

0helpful
1answer

Repeated convergence problem or something new?

call the shop and see what the warranty repair on the last repair is,the convergence ic must have shorted again and now the set went into shut down to protect itself.
Not finding what you are looking for?

82 views

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76835 Answers

Cindy Wells

Level 3 Expert

6448 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...