How to load data disk for motorola on my computer

Hello,

all you have to do is to simply set the jumper at the back of he hard disk, beside where the IDE cable and power enter into the hard disk.

Just keep setting till you put at the right position where the system recognizes it.

There is nothing wrong with your PC and hard drive, just set the jumper of the Hard disk and that should be all.

Take care.

I think i can solve this first pulg youur cable thorough usb port then plugT the other end to your phone click start>mycomputer it will say remoable disk any letter mine is e and click it view your pics and highlight thme hit right click copy and go on your desk top and right click paste it will copy your photos
your done.

Check the data cable. Make sure it is fully connected. (Sometimes they come loose). Check all connected data cable's & power cables within the system. Start with the new drive you installed. Unplug the data cable & re-connect. Follow it to the motherboard & do the same. If no cable seemed loose than replace the hard disk drive's cable with a new cable. Standard 80-conductor Ultra DMA IDE/ATA interface cable. See below;

When you start up the dimension 4600, enter the bios, watch your screen at start up. You will need to press F2 or F10 key to enter the bios.
Once in the bios check that you hard disk drive is shown.
Most bios will list the drive by its model number. If you see the model number of the drive chances are you can save & exit the bios. Button up the case. You should be able to load windows.

Luck!
Mike

You will need to purchase Motorola Mobile Office Tools to transfer data and pics to/from your Razr. You can send them to your email box but that will incur internet phone charges.

There are two ways to do this.

1 you use bluetooth, you need to buy a bluetooth adapter if the computer does not have built in bluetooth, you will send data using a bluetooth wireless connection.

2 you use usb cable connection. You will need an usb cable for your phone, and the software that is in the phone disk. If you do not have the disk you can download software from Motorola website.

It is possible that you have a bad data chord. Recently I have come across several data chords that will not acknowledge the v3 cell phone I was trying to use with my Motorola Tools program. I tried a different data cable and it worked without any problems. If you don't have a 2nd data cable you might ask friends and family if they have one you can borrow so you can verify if it is the data cable or not. If you find that it is the data cable you could then purchase another one.

just visit motorola site and download pc suit for ur handset and a datas cable from motorola dealear for ur handset or from market and try loading ur videos and mp3 songs or take it out ur memory card and put it in card reader and exchange ur video frm ur pc. reply me

bluetooth is a wireless application
If you are using a cable you will need software from motorola to be able to down load.
go to www.motorola.com and follow the prompts for data transfer

Very Simple Solution. I have the same phone.
First you need a Data Cable that connects your phone to a USB port on your PC.
Secondly, go to http://idenphones.motorola.com/iden/support/software/html/mp3_software.html
and download the mp3 loader.
Its very easy to use. good luck.
btw, I found a data cable on ebay for $5

Plz. use Motorola Phone Tools software, (available in other motorola mobile disk) to connect to PC use usb cable. okey bye