You can buy the manual for your remote here for $ 4.95:
http://www.replacementremotes.com/store/productdetailp.cfm?productid=56156
Or click.
I Also report the excellent solution described on the link from Kevin000:
"
Codesearch:
1 Turn on the component you want to program.
2 Press and hold both the TV/DVD/ect button and the power button untill the light comes on and stays on
3 Press the play button every 5 seconds until the device turns off. A bank of ten codes is being sent each time.
4 Press the rewind/reverse button to see if it turns off/on again.
Wait 2 seconds and press again until it turns back on.You may have to
do this up to 10 times until it searches through the bank of ten codes
sent.
5 Press and hold the stop button until the light goes off. This saves the code.
Here's the code page:
http://remotefinder.rca.com/default.aspx?site=rca
RCR412s should work for you.
Thanks
1 Turn on the TV set.
2 Press and hold both the TV button and the power button until the light comes on and stays on.
3 Press the play button every 5 seconds until the device turns off.
4 Press the rewind/reverse button to see if it turns off/on again.
Wait 2 seconds and press again until it turns back on.You may have to
do this up to 10 times.
5 Press and hold the stop button until the light goes off.
Your code is now saved and you can use the remote to control your TV set.
I want you to go through this link ..
http://www.wikihow.com/Program-an-RCA-Universal-Remote-Without-a-%22Code-Search%22-Button
just click on this link...
http://www.wikihow.com/Program-an-RCA-Un...
This will help you
Thanks
Kevin000
1 Turn on the component you want to program.
2 Press and hold both the TV/DVD/ect button and the power button untill the light comes on and stays on
3 Press the play button every 5 seconds until the device turns off. A bank of ten codes is being sent each time.
4 Press the rewind/reverse button to see if it turns off/on again.
Wait 2 seconds and press again until it turns back on.You may have to
do this up to 10 times until it searches through the bank of ten codes
sent.
5 Press and hold the stop button until the light goes off. This saves the code.
keep me updated
thanks
Kev in
×
Hey,
This page with instructions should solve your problem
http://www.thompsontv.com/rcarc.html
let me know if you need something else or if that doesn't work.
Thanks,
Ekse
148 views
Usually answered in minutes!
The Universal Remote Control that I have does not have a code search button on it. Like I said, it is older but not an antique. What now?
×