Question about Canon CP-1460D Calculator

Open Question

Need to know why it won't let me update the "date"?

I just got my new CP1460D and I was able to set the date. However, I noticed the next day the date is still set for the previous day. I followed the instructions that came with the calculator, however, it will not allow me to change the date to the current date. I thought it would do it automatically, but it seems that it hasn't. Is there any advice on how to redo it or reset it?

Posted by Denise Ballard on

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: Won't print/feed

Try removing the batteries in addition to reseting the calculator.

Posted on Nov 29, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: Cannot set the date on my Canon P23-DH V calcualtor

ok, have your calculator set on "on" press the "time/clock" button once, when date appears on calculator press the "M+=" and hold until first number on date flashes, enter the date you want, when done switch your calculator from "on" to "print". date should be saved. do the same for time.

Posted on Feb 05, 2008

Ad
old marine

old marine

  • 2366 Answers

SOURCE: set the time and date on a canon mp25dv/instructions

To set date:
1. Press the calendar/clock button (display should show date)
2. Press and hold the 'time set' button for 3 seconds (first digit of the date should flash)
3. Use the numeric keys to enter date using mmddyyyy format
4. Press 'time set' button

To set time:
1. Press the calendar/clock button twice (display should show time)
2. Press and hold the 'time set' button for 3 seconds (first digit of the time should flash)
3. Use the numeric keys to enter time using hhmm format, press 'AM/PM' button as needed
4. Press 'time set' button

The '12/24' button changes between 12 hour and 24 hour format for time.
The 'format' button changes the date format from mmddyyyy to ddmmyyyy or yyyymmdd.

Posted on Feb 26, 2009

Cheri Murphy

  • 3 Answers

SOURCE: I am trying to set time and date on a calculator

OK, I bought one over the weekend just for chuckles. I figured it out.
On the top of the calculator there is a key that shows a little clock. Punch it once and the date appears...like 01-01-2000 or somesuch. Press it again and the time shows up..

Hold the time set key (=) down for a second until the first zero starts to flash. All you have to do is start punching in the time. When you are done press the time set key again. Voila!

Punch the key with the little clock again and the date shows up. Hold down the time set key for a second like explained above until it starts flashing. Enter the date with the key pad numbers. Done!

I couldn't figure this out either till I looked above each key (didn't notice what it said). Anyway, look real close.

Hope it works out for all and everyone finds this solution...

CMHIMG

Posted on Apr 21, 2009

Anonymous

  • 1 Answer

SOURCE: MP11DX time and date will not set

I just did it over and over again, I think I may have even hit the = afterl. To change the AM hold down the calendar key, then the div

Posted on Jul 14, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I need to check that my credit card is the correct card to use

Log into your paypal account .

How do I change the expiry date of the credit or debit card in my PayPal account?
Here's how to change the expiry date of your credit or debit card:
  1. Go to your Wallet.
  2. Choose the card you'd like to update.
  3. Click Update card.
  4. Update your information and click Update card.
0helpful
1answer

My WWF score is 2 games out of date. Anything I can do to get it fixed?

Best Players Assumed to be Cheaters « Words With Friends

wordswithfriends.net/?p=965
Jun 8, 2015 - I've played two games against him and one thing you notice is score ... I played 2 common words, and they played the word jaio, and I'm the cheater? I am a .... Sometimes I can easily find the definition and will use that word at a later date. ..... It's not a game about coming up with words,it's about strategy.

Everything You Need to Know About the New Words With ...

time.com/3478714/words-with-friends-new/

TimeOct 9, 2014 - Zynga on Thursday is rolling out a sleeker, more robust version of Words With Friends, the Scrabble-esque mobile game that first came out in ...
0helpful
1answer

Avaya phone 5410 how can I manually change time

The IPO should get its time from the VM Pro server. The time server should be
set to the IP address if the VM Pro pc. If there isnt a vmpro pc, you can set
it manually.

http://mfurrer.dyndns.org/?p=224
For IP Office systems without access to a time server, a number of methods to
manually set the system time exist. These are available in the IP Office 4.1+.
The following method is only supported on these phones: 2410, 2420, 4412, 4424,
4612, 4624, 4610, 4620, 4621, 5410, 5420, 5610, 5620, 5621, 6412, 6424. It is
supported on any analog, T3, T3 IP or wireless (IP DECT, 3600, 3700 Series)
phones.



Note: If the IP Office system that is still configured for automatic time
updates (on by default), any manually set time and date will be overridden on
the next automatic update. The use of automatic updates can be disabled by
setting the System ' System ' Time Server IP Address to 0.0.0.1.

Enabling a User Button for Time and Date

Select the user who can adjust the system time and date.
If necessary create a new user who can be used to log in and set the
time and date before logging out.
On the User ' Telephony tab, ensure that the option System Phone is
selected.
On the User ' Button Programming tab select and double-click on an available
button.
Select Emulation > Self-Administer as the action.
In the Action Data field enter 2.
Enter an appropriate label for the button.
Adding another button set to the Emulation > Time of Day action is
recommended as this will allow the user to view and confirm the systems current
time.
In the User tab, Change System Phone Rights to "Level2"
Send the updated configuration to the IP Office.

Using the Programmable Button

Press the programmed button. If the user has a Login Code enter it as
requested, and press Done
The options Date and Time are displayed.
To set the date press Date.
The current system date is displayed.
Enter the new date, using two digits for day and month. Use the * or #
keys to insert the / separators. The format for date enter matches the locale of
the IP Office system.
During entry the key labeled <<< can be used to backspace.
When the full date has been entered as required, press Next.
Press Done.
The phone will return to idle.
To set the time press Time.
The current system time is displayed.
Enter the new time using 24-hour clock format. Use the * or # keys to
insert the : separator.
When the full time has been entered as required, press Done.
The phone will return to idle.
9helpful
5answers

My Sony Dream Machine won't save the correct time. When I set the date, it defaults back to 2009, and even when I get the correct time set, the clock won't advance. It's been 8:52 PM for...

My wife's unit has the same issue - tried the firmware update (from Sony's website) and their suggested fix with no luck. Still works as a digital picture frame, but wrong date and stuck time kind of disappoint.

FYI - Suggested fix for stuck date/time:

Unplug unit.
Remove backup battery.
Leave for 30 seconds.
Plug back in and then put battery back.
Set date and time.

Didn't work for me, but maybe you'll have better luck.
0helpful
1answer

MY PHONE SHOWS THE RIGHT TIME BUT THE WRONG DAY. THE SCREEN SHOWS - NEW CD:29?

Hi,

do not really know the kind of phone you are talking about, sometimes if you but a different theme i might change the time, so you will need to reset the time again to the correct time.

You can go to the setting of the phone and reset the time and date again.

But note this, if the time is on auto-update, you will need to remove from auto-update so that you can set the time manual yourself.

Please next time, it will be much more easier if you but the make and the model of the phone on your question so that you will get a definite answer.

Have a nice day.
14helpful
2answers

My me1020 came without instructions and i do not know how to set the date, min nor theday please help

Actually there is no instruction manual for ME1020 available on Fossil website except for how to replace the battery. When you try to match ME1020 model with the available diagrams, there is no match (4 eyes). To set the time, pull the crown out to the second position. Now set the min/hour hands. Date hand is linked to it so keep rotating the crown till the date is set is set correctly. Now remaining is the day setting. Notice that the day changes every 24 hour mark on the 24 Hour sub-dial, so cross this mark to change the day. Go reverse & again cross the 24 hour mark to get the next day. Repeat this till you get the correct day setting. Now your day is also set along with date & time!
2helpful
2answers

Setting the date on my rolex president day/date watch

if all else fales, you are probably in need of a service.
0helpful
1answer

Change time

Hey here is something you can use to adjust the time on your T7206.To Change the Time:
1. Press the CHANGE softkey Display will read: "Hour:
2. Press the CHANGE softkey Display will read: "Hour: _ "
3. Enter the new HOUR. (in 24-hour format - Ex.: 5:00pm = 17:00. Display will then read the new Hour programmed.
4. Press NEXT Display will read: "Minutes: # # "
5. Press the CHANGE softkey Display will read: "Minutes": _ "
6. Enter the new MINUTES.
To Change the Date:
1. Press NEXT Display will read: "Date DD MM YY"
2. Press the CHANGE softkey Display will read: "Year: # # "
3. Press the CHANGE softkey, (If the year is incorrect) Display will read: "Year: _ "
4. Enter the new YEAR Display will then read the new Year programmed.
5. Press NEXT Display will read: "Month: # # "
6. Press the CHANGE softkey, (If the month is incorrect) Display will read: "Month: _ "
7. Enter the new MONTH Display will then read the new Month programmed
8. Press NEXT Display will read: "Month: # # "
9. Press the CHANGE softkey, (If the day is incorrect) Display will read: "Day: _ "
10. Enter the new DAY Display will then read the new Day programmed

Let me know how that turns out and good luck

1helpful
1answer

Wii Fit- Editing the time of day

The FIT gets its time from the console. Go to the WII settings screen and update the date/time there.
1helpful
3answers

Wrong date on the radio.

RESETTING THE CLOCK AFTER A TOTAL MEMORY LOSS

If you do not change the built in lithium battery within a reasonable period of time after you see the ‘flashing’ LOW BATT. warning indicator, the lithium battery may become exhausted and will no longer be able to supply back up power to the SmartSet internal computer.

If the unit is disconnected from the AC outlet after the battery is exhausted, or if a power interruption occurs, the SmartSet memory will be lost and the clock will need to be reset when the power is restored. Be sure to install a fresh lithium battery before you reset the clock, otherwise the clock will need to be reset each time the power is interrupted.

If the lithium battery is exhausted and you experience an interruption in the AC power supply, the clock will reset itself to its initial default setting when the power is restored.

The initial default setting is “12:00 AM, Saturday, January 1
(1 1), 2005”.

If you notice that the time on your SmartSet clock radio is completely incorrect, and the day indicator is also wrong, press the MONTH/DATE button to see the date. If the date display is showing “1 1” (January 1 ), you probably experienced
a total memory loss. To reset the clock after a total memory loss, proceed as follows:

1.) Install a new CR2430 lithium battery in the battery compartment.

2.) Connect the radio to your AC outlet and let the clock set itself.

3.) Depress the MONTH/DATE and TIME buttons together. The display will change from ‘time’ to ‘year’. While holding the MONTH/DATE and TIME buttons, press the UP button to
set the display to the correct year, then release the buttons.

4.) Depress the MONTH/DATE button. The display will change from ‘time’ to 'month/date’ (mm/dd). While holding the MONTH/DATE button, press the UP button to set the display
to the correct month and date. The Day indicator will change automatically as you adjust the month/date settings. When the correct month and date appear on the display, release the buttons.

5.) Depress the TIME button and the UP button to set the display to the correct time. Be sure to confirm that you have set the time correctly to ‘AM’ or ‘PM’ by observing the AM indicator.

6.) After you set the time, reconfirm that the Day, and Month/Date displays are still correct. Make final adjustments if necessary.

The SmartSet clock memory is now reset and the new lithium battery will maintain it for the next 5 to 8 years, depending on the number and duration of the power outages you experience.

IMPORTANT NOTE:
After resetting the clock, don’t forget to reset your wake up times, and alarm mode settings, and sleep timer settings as well.
Not finding what you are looking for?
Canon CP-1460D Calculator Logo

Related Topics:

40 views

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2366 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6301 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...