I can't find the remote control code for this ilo 2600. I tried the codes il02600, ilo2600, ilo2600 and noe of them worked on the websites. Please help. I will even buy a new one if possible.
I finally found a direct tv remote code for my Ilo television. It was 10171. Others you can try that were for Direct TV remote: 10154 10236 10463 10180 10178 10019 10177 10623 10179
The code is 0183. Manufacturer is listed as "Penney." Woked for my verizon univesal remote. This took many days of trial and error. I hope that someone may benefit from my sand pounding. GK
I have found that a code for a Funai worked with my GE universal remote. 0189
Ok good but for the right stuff, go to http://www.remotes.net
Remote Control Replacement Store Buy Replacement...
Factory Original Replacement remote...
To search for the code to any TV:
Turn the TV on.
Press the TV button.
Press and hold the setup button until the TV button blinks twice.
Press 991. The TV button will blink twice.
Aim the remote at the TV and slowly alternate between the power and TV button until the power goes off.
Press the setup button to lock in the code.
The TV button will blink twice.
When seting the remote for code, hit the power button then the up key till the tv turns off. then # your code is set. (Old Man Cleat)
You can use this code it will work for ilo televison 0171 or 0180 Mr. Paws
5,290 views
Usually answered in minutes!
I found it. the code is ilo2600
can1t program direct tv universal for ilo 2600
needed rca uiversal remote codes for ilo 2600
2600 doesn't work for me
I need a 5 digit code for the TV in order for my universal remote to work. Does anyone have a 5 digit code for it?
I need a 4 digit code for my ilo television to enter into my tivo remote control and I have tried all of the codes mentioned above. ILo is not one of the choices for brands in the search and I also tried Funai and Penney and neither worked. Anyone with the same problem or have a solution?
my remote will only turn the tv on & off .controls on the side of TV don't work either I cannot adj volume or change the channel
the remote for my ILO tv no longer works and I need a code for a universal remote
×