Not sure what the user name and password
I assume that you are referring to the router's username and password. if so, by default, there's no username and password. you just need to leave both fields blank. but if you have created one for your router and can't remember it, the only option to access the router's page is to reset everything back to default.
hope this'll help you
ciao!
If its a new router the username and password is admin
username =admin
password = admin
if its used then reset it by pressing the reset button on it (YES ITS THERE A SMALL BUTTON YOU WILL NEED A PEN TO PUSH) and then the username is admin and the password is admin
Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser.
By default the ip address should be set to 192.168.1.254
type .........http://192.168.1.254
You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are blank.
Click the Ok button to log in to your router.
If you already had a password, you need that or need to reset the router to factory settings in order to start over again.
If your Windows PC has is equipped with an Ethernet port, you can
connect your PC and Macintosh using an Ethernet cable. By doing this,
you are creating a small local network, consisting of just the two
computers. Set up your Windows PC by turning on File Sharing. Refer to
the instructions that came with your Windows PC if you're not sure how
to do this.
To locate and connect to the Windows
computer, you can use the sidebar in a Finder window. You need to know
the workgroup name for the computer and the network name (called the
"computer name") for the computer. To connect to the computer, you also
need a user name and password and the name of the shared folder you want
to access. If you don't have this information, contact the person who
owns the computer or your network administrator.
If you cannot locate the Windows
computer in the Network browser, you may be able to connect to it using
the Connect To Server dialog in the Finder.
Make sure the Internet Connection
Firewall is turned off, or if it's on make sure TCP port 445 is open to
allow sharing connections.
To connect you Mac and Windows computers:
In the Finder, choose Go > "Connect to Server."
Type the network address for the computer in the Server Address text box using one of these formats:
smb://DNSname/sharename
smb://IPaddress/sharename
Follow the onscreen instructions to type the workgroup name and a user
name and password, and choose the shared folder you want to access.
220 views
Usually answered in minutes!
how do you reset the factory settings
×