Samsung MW1280STA 1100 Watts Microwave Oven Logo

Related Topics:

Question about Samsung MW1280STA 1100 Watts Microwave Oven

1 Answer

Oven beepstwice every 10 min.

After using the oven, it beeps twice every 10 min. (exactly 10). Only after pulling the power plug and resetting it will stop the beeping. And then it repeats after the next using of the oven. How can I reset it permanently?

Posted by jack wilson on

Ad

1 Answer

William Miller

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 9,179 Answers

Looking at the owner's manual, it would seem that the beep is supposed to occur at one minute intervals when cooking is completed. You may need to press the CANCEL pad to make it stop, but I would assume you shouldn't have to. I would assume that when the control panel senses that the door has been opened, it should stop beeping. It sounds like the code in the microprocessor has been corrupted, but only replacement of the chip would fix that. The owner's manual is online at: http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=SS&CttFileID=33043&CDCttType=UM&ModelType=N&ModelName=MW1280STA&VPath=UM/200304/20030418120018750_1_MW1280STA.pdf ( a better URL is http://tinyurl.com/ybpwlm ) You might consider calling Samsung support at 1-800-SAMSUNG (1-800-726-7864) Mon-Sun: 9am-9pm (EST). Good luck.

Posted on Nov 01, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Just stopped working as we were heating something up. checked the plug with other electronic device and it worked.

Try tripping the breaker on the circuit that it is on, and leave powered down for ~10 minutes. This will sometimes reset these ovens (has happened to me twice, and this "fixed" it both times.

Good luck,

--W/D--
0helpful
1answer

Hello, I have the whirlpool microwave oven, Model ...

logic board needs replacement if it cannot be reset.
0helpful
1answer

Whirlpool Microwave Hood Combination MH3184XPS-0 (October 2004), for no reason at all, this morning keeps beeping and running the power setting down from 10 to 1, and just keeps doing it in rapid sequence....

Ours just started doing this exact same thing this past Friday - 12/11/09. What's going on? The cook power just starts beeping all by itself and going from 10 down to 1 over and over again. It may stop momentarily, but then starts again within a minute or so - it's constant until we unplug it. We plug it back in and within a few minutes it starts doing it again. What gives?
2helpful
1answer

Model jvm131h002 Stopped working. no power or

yes, at the back of the microwave there are 4 or 6 screws, take them out and then pull the cover follow the cable( the one you connect to the outlet) going to the inside of the microwave inside you will see the fuse change it with the same size, it is a slow burn fuse
0helpful
1answer

GE spacemaker Power goes off and clock needs resetting

Try going to the breaker box and shutting off the power to the microwave for 10 minutes. After 10 minutes, turn back on and set the clock. This fixed my clock and turntable both. Apparently turning off the power resets the software in the clock.
10helpful
2answers

I have lost instruction book for Sharp Compact R250A microwave oven-how do I reset the clock?

May be a little late, but... 1. Press Power Level button for approx 5 seconds - you get the 12 hour clock 2. Press again for 24 hour clock 3. Set hours using the 10 min and 1 min buttons 4. Press Power level button 5. Set minutes using the 10 min and 1 min buttons 6. Press Power level button And you are done
Gert
0helpful
2answers

GE xl 1800 beep

The first thing to try is a "hard reset". Unplug it from the power line for a minute, plug it back in, set the clock, then try again.

Let us know if the hard reset doesn't fix it.

0helpful
1answer

Help

Try to unplug the micowave and let it stay unplugged for 10 -15 minutes. Plug it back in after 10-15 mins and see if it resets the error message.
0helpful
2answers

Crisp display

yes, it does indicates there is a bigger problem It has run a self- checking program and displayed the error before calling help see in this model page there is a manual of the oven, check last pages if they help u if no still there are instructions what to do and who to connect read it well before calling it will save u more then a couple of $$$ good luck windman
Not finding what you are looking for?

524 views

Ask a Question

Usually answered in minutes!

Top Samsung Microwave Ovens Experts

Muzahura Frank

Level 3 Expert

2071 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

The Knight
The Knight

Level 3 Expert

76835 Answers

Are you a Samsung Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...