Won't turn on. Green power light blinks for 30 seconds and then red lamp light blinks constantly

Panasonic DLP TV Bulbs

Make sure its an original Osram or Philips bulb inside the housing. If its a cheap lamp it will act this way. If it is an original lamp, then you may have a power supply issue. It shouldn't affect your TV but you may want to try resetting the lamp timer by following the instructions that came with the lamp.

TY-LA1001 Timer reset

While pressing the VOL- button on the projection display, hold down the number 0 button on the remote control at the same time for more than 5 seconds.

colour wheel issues and defective lamp replacing lamp and light engine color wheel cos its worn out

Hi,

Formatting is available only while playback is stopped.
If the OPR lamp lights red due to low remaining battery power, the player cannot be formatted.
All data stored on the player will be erased.
The Content Transfer software included with the player will also be deleted.
If necessary, download Content Transfer from the customer support web site.
The settings of shuffle playback, playlist playback, ZAPPIN playback, and AVLS (volume limit) also return to their defaults.
Follow the steps below to format the Player.
1 Unite the left and right parts to turn off the player.
2 Separate the left and right parts.
3 Press and hold the jog lever for about 15 seconds until the status lamp blinks quickly. Release the jog lever. The OPR lamp lights red.
4 Move the jog lever forward or backward within 30 seconds after the OPR lamp lights red. The status lamp turns off. The OPR lamp lights alternately green and red each time you move the jog lever.
5 Press the jog lever while the OPR lamp lights green. The OPR lamp blinks green quickly and formatting is executed. When the OPR lamp turns off, formatting is complete. If you press the jog lever while the OPR lamp lights red, or if 30 seconds have passed, formatting will be canceled.

Thanks for contacting FixYa.

Even i also had a same problem after format a player its working good. Format your player and put songs again. thats it.

Notes:

• Formatting is only available when the player does not playback.
• If the OPR lamp lights red due to low remaining battery power, the player cannot be formatted.
• All data stored on the player will be erased.
• The Content Transfer software included with the player will also be deleted. If necessary,
  download Content Transfer from the customer support web site.

1. Unite the left and right parts to turn off the player.
2. Separate the left and right parts.
3. Press and hold the jog dial for about 15 seconds until the status lamp blinks quickly.
   Release the jog dial. The OPR lamp lights red.
4. Rotate the jog dial within 30 seconds after the OPR lamp lights red.
   The status lamp turns off. The OPR lamp lights alternately green and red each time you rotate the jog dial.
5. Press the jog dial while the OPR lamp lights green.
   The OPR lamp blinks green quickly and formatting is executed. When the OPR lamp turns off, formatting is complete. If you press the jog dial while the OPR lamp lights red, or if 30 seconds have passed, formatting will be canceled.

have a nice song for ever...!!!!!!!!!!!!!!!!!!!!!!!!

It may be the ballast....

Check your color wheel. There is a DIY guide for replacing the color wheel. Mine did the same thing yours is and my color wheel was all busted up. Unfortunately after replacing the color wheel my set continues to do the same thing, but this could mean I need to replace the ballast as well.

The color wheel needs replacing. Thats causing the whining and it will also make the lamp light blink.

The $1200 was for the lcd engine not the lamp. You should change the lamp. The buzz is the power supply trying to light the lamp.

i also have the same problem with the flashing green light for a while then a different red light starts blinking on and off around 5 times....and i replaced my burnt bulb with a new one...still no picture.

What are the labels on the lights? Timer/Lamp/Service and what color is wich?