I have a Sony Handycam CCD-TRV37 that we didn't use very often, approximately 10 hours recorded. All was fine the last time I used it but now I see no picture through the viewfinder or screen when recording. Playback has sound but no picture.
I have a similar camcorder Sony for about 3 years. it was working beautifully until last week. All of a sudden, everything I want to see from the viewfinder became blurry and colors are faded away. A lot of tiny dots submerged in a ocean.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: Records sound but no picture
There are two possible problem of your camera...one check the iris of the camera if it is opening,you will see it went you look inside the lens when you turn on camera mode....and if you see that the iris is opening...the second may be the ccd image sensor......if that is the problem you have no choice but to go the sony service for replacing the ccd image sensor...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes It Is Possible.
1. Cable options you can use S-video or RCA.
2. VHS payer that has a recording option. Make sure that it supports the Sony Handycam 8mm.
3. The procedure on how to transfer the 8mm to VHS is the same as how you view your video on the TV.
4. S-video or RCA should be connected on the Handycam and the other end is on the TV.
5. You can follow the instruction on page 27 (Sony Handycam CCD-TRV37)
6. You can also follow page 52 (Sony Handycam CCD-TRV37 )
Look for the output jacks on your camera, hook them to your computer's audio/video input. Try accessing the recording utility on the computer then upload footage through NTSC format. You can then edit the footage. If your camera and computer utilize S-video, use them for best resolution
it is whats called moisture condensation. this happens when the camera goes from a cold to a hot environment very quickly, and vice versa. Simply leave the camera standing with the tape door open for about an hour, and then try again. If this does not fix it, then try cleaning the video heads, and make sure the camera is not in a humid environment, as this will also cause this to happen.