Fuji FinePix A205 Digital Camera Logo

Related Topics:

debby faucett Posted on Sep 02, 2006

Camera cuts off when I take a picture

I have 2 problems but the main one is that everytime a click a picture, the camera cuts off. I have changed the batteries, cleaned the battery contacts and it still happens. The second problem says card is not initialized. I have formated the xd picture card in the camera, cleaned the card. The main problem is the camera cutting off when I snap a picture. Any suggestions are appreciated.

1 Answer



Same here, i thought that the camera was going into sleep mode to save batteries, the light turning red dosent inspire confidence

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


My camera goes off after 2 minutes the screen goes blink and doesn't take pictures you have to cut it off then turn it back on if no motion it goes back off don't have instructions anymore what shall i do

Try cleaning the battery contacts and the battery itself with a q tip dampened (not wet) with 91% rubbing alcohol. Then, in the main menu click to set all values back to Factory default.

Viviat X029 indoor pictures blurry

Welcome to Fixya.

In order for you to have a perfect image of your pictures, you just have to changed the settings or mode of your camera depend on the location.

I have a manual here on how you can change the picture mode everytime your going to take pictures. Just click on this link. You can found it on page 12.

I hope this manual can help you on your issues.
Feel free to reply on this email if you have any comments or question

Thank You for using FixYa.

My picture will not focus its blurry everytime I take a picture....not sure how to fix this???

Welcome to FixYa,

One possible reason is you have to changed or edit the settings of your camera.

I have a manual here where you can read on page 21 all the information in setting up your camers for shooting.

Just click here.

Hope this link will help you more and can answered your problems.

Thank you for using Fixya.

Everytime i try to take a picture it says card error

Hi, try to format your SD Card on your camera (backup pictures first).
If you can't then try to format on your PC. To format on your pC do the following steps:
1) insert your SD card
2) right click the SD Card Drive (make sure you select the correct one) choosing the wrong
drive would cause BIG problems for you. If you don't know which drive it is Do Not Continue
3) Select Format.

If you PC doesn't format properly or has a problem with the card then you know the problem
is the card and not your camera. Make sure also that the SD Card is not Locked.

I have Cannon EOS Rebel xsi. The camera does not take picture when press the shutter in all modes. There is no error message. Have change the memory card, recharge the battery and none work.

Hello Sure !

The probleme :
The Shuteer Has A cable Connected to Recorder
Maybe The cable Has Cutted when you Shut ,or Maybe Cutted When You Charged The Battery cause When your put your camera on the charge , the cable goes be hot and it should be cutted .

Solving The Probleme :
1) I advise You To Change The Cable
2) Push The Reset Button
3) Charge It Again

It works 100%


I have a w890i and the camera does not take pictures but it records videos with no problem ive reset all the settings twice but no change everytime u capture a picture it goes back to main menu and doesnt...

There may be some Hardware Problem or there are equal chances of your Firmware Bug, if it is a Firmware Issue, You need to Update your Firmware through SEUS.
Download is at this Page and also read as much as you can, to have a knowhow before starting.

Can't change my YM display picture

Go to 'Messenger' in the menu and select the option 'My Display Picture' or press Ctrl+Shift+F8 and you will get a window
1.select the option "share my picture"
2. click the button to select the picture
3. Delete the old picture you were using, by selecting the picture and click the button 'delete picture'
4. Select the new picture and click OK

Orbicam not showing images

did you back up your drivers before installing? If so put backup cd in and reinstall drivers pointing it to the cd for driver files

I’m happy to assist further over the phone at https://www.6ya.com/expert/james_1cb31da1bc8c6102


Image Problems

the film is pulled by gears as u click and wind..one gear tooth broke inside camera body causes weird things like u said and then catches to move around to get the clich again. dont know if gear is plastic or metal I read on internet some metal gear replacements....try looking there. really not sure but i think im in the ball park. CrazyLarry
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Steven Wander
Steven Wander

Level 3 Expert

599 Answers

Brad Brown

Level 3 Expert

19185 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides