Compaq (258125-001) Motherboard Logo

Related Topics:

Question about Compaq (258125-001) Motherboard

2 Answers

What available?

I have noticed one annoying little bit of information missing in all our links concerning compaq...and from experience i know i am not far off...DOES anyone know where to get manual for 258125-001 or other compaq boards? I can't find this and i have found one on the internet for every board i have ever had in posession.. thanks so much

Posted by Anonymous on

2 Answers


Compaq 261671 001 diaghram

Posted on Mar 09, 2008


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 47 Answers

As far as the schematic for Compaq MoBo's good luck...I can't recall ever seeing a sheet for just a Compaq board, only systems. (I think that board was made be HP so maybe searching that way will yield results) You might get lucky here: They have Compaq system schematics, maybe you can find one that uses that MoBo and has the info you need. Good Luck, El Duderino

Posted on Nov 16, 2006

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


I dont know how to change the drillbit in my dw257 corded drill

Do you mean the Dewalt DW257 drywall screwdriver? For that model, you need to pull the adjustment collar forward. (This part fits over the drill bit to the clutch housing.) Remove the collar completely. Then using pliers, if needed, pull the drill bit tip out of the holder. Then put a new tip into the holder. Then snap the adjustment collar back over the retaining ring. See Figure 3 on page 2 of the manual (see below for a link) to see what the adjustment collar looks like.

If you want to replace the bit holder and the drill bit tip, pull the holder straight out from the drill. (Again use pliers if it is tight.) Then push a new bit holder into the spindle until the ball lock snaps into the groove of the bit holder shank. Put in the bit tip. Then put the adjustment collar on and make sure it snaps into the retaining ring.

These are the directions for the Type 3 DW257. The manual is available here: . From the Product Information tab, select your model type and the instruction manual will be shown in the right hand column, if it is available. The manual is available as a PDF; you will need Adobe Reader or a similar program to read the manual.

I hope this helps.

Cindy Wells

Hp compaq nc8230 bluetooth drivr free download


Improve the experience for everyone by voting!

You have two free choices.

  1. Click on the following link for the official HP/Compaq driver website: HP Drivers
  2. Click on the following link for the largest FREE driver database on the internet. Driver Download

All the best,


ML11664 To whom it may concern, I am missing the owner's manual for my brand new Malibu Low Voltage Transformer. Above is the model number, I believe. A second one is model # ML13251. Thank you...

Hello Maggie.
Timer is not 100% identified
Intermatic analog ML series power packs and manuals appear on following link:
Malibu ML series manuals appear on following link, and are same as Intermatic:

Open following link for general instructions written in troubleshoot format, plus tips for maintaining power pack and ordering additional trippers:

Add a comment for more help, and include in-focus photo of timer posted on Flickr for possible information

WiFi can't instlalling in my laptop(dell Inpiron N5010),

Driver for Windows 7 (32-bit and 64-Bit) are available.
As the laptop comes with 64-Bit version, these drivers are available at Dell Official Site.
Dell Inspiron WLAN (Wifi) Driver for Windows 7 32Bit are not available from Dell Official or Microsoft Update (online).
I came accross this issue and solved it by searching 32Bit Drivers for the WLAN hardware and found the drivers. Below is the link from Intel Official Support.
Intel WiFi Link 1000BGN Drivers
Download/ Install the drivers/ and Enjoy wireless internet connectivity!
From adaptor properties - Advanced, select AUTO for 802.11n Channel Width to experience 300Mbps downlink Data Rate.!!!

Hope it helps! Good Luck!

I need vga driver for my compaq presario c713NR. my OS is XP64. my name james. +2348063851671. [email protected]. thanx

64 Bit driver for XP is not available directly with HP.
you computer has 965 chipset express video availble in your system.
Below link will take you to intel from where you can download the 64 bit driver for your video
Direct Link

My Network Driver Missing

You can download the drivers from the following link:


Please contact your local HP representative for information on the specific update methods available for this product

User's manual for typewriter GX-6750


Click on the link in the thread. This should open up an Amazon page. About halfway down (in quite small writing) is a link to a user manuak. You will need Adobe Reader to view it though.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

589 Answers


Level 3 Expert

85242 Answers

Brad Brown

Level 3 Expert

19166 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides