Power swiths doesn't work neither the spond mode.

Pavers Saplay fold

link to manual below
http://portablemedia.manualsonline.com/manuals/mfg/homedics/ss6000.html?p=3

Have the same unit but experience no problems. Sounds like a freon leak has left it inert. You can of course switch from auto to gas and eliminate the auto switch over as part of the problem. You can see the gas flame in the outside access hatch, (or maybe hear it) to be sure it is getting gas. since it doesn't respond in auto, which would also work in electric mode, I think it is the freon problem.

So I assume you have pressed the button by pool to select the pool thermostat? If this doesn't work sounds like another mother board problem, or try powering down the unit a few minutes then restart. IF you haven't pressed the pool button, the read this: The heater comes factory set at 78° F. for the pool mode and 100° F. for the spa mode. If it's in spa mode it's trying to get to 100F. Using the up and down arrows,you can set the thermostats to a minimum temperature of 65° F., or a maximum of 104° F. If you desire to heat only one
body of water, the thermostat is capable of an off mode. As an example, if you only wish to heat the pool and not the spa simply depress and hold the spa down arrow, and the thermostat will lower its setting to 65° F. then go to an off mode. Here is a link to your manual :http://www.pentairpool.com/pdfs/MasterTempOM.pdf

Here is a link for Pali crib with dropside made from 1994 to 2000. Hope this helps. http://www.pali-design.com/docs/Crib98ING-SPA.pdf

Questions about PALI? Give Baby Cribs Plus customer service a call at (800) 349-9131, Mon-Fri 8-9, Sat and Sun 10-5 EST or e-mail us at [email protected]

Pali Order Parts
http://www.pali-design.com/index.php?path=customer_services&template=order_parts&section=customer_services&subsection=order_parts&page=order_parts

I found this link that has the direction to assembling most of the Pali cribs. I hope it helps.

http://www.cloud9web.com/pali_crib_inst.pdf

Here is Pali toll free number 877-725-4772 It helped me when I had missing screws

1994 to 2000 includes April http://www.pali-design.com/docs/Crib98ING-SPA.pdf
2001 to 2003 includes April http://www.pali-design.com/docs/STD02.pdf