Icannot get a picture on the tv when connecting a laptop, I have gone into menu and selected pc in thr rgb mode, i can get teh sound but get a no signal when trying to get as picture, please can you help.Icannot get a picture on the tv when connecting a laptop, I have gone into menu and selected pc in thr rgb mode, i can get teh sound but get a no signal when trying to get as picture, please can you help.
You can't post conmments that contain an email address.
In the menu screen you will see RGB DTV
Highlight that setting and use the right arrow on the remote and you will come across RGB PC. Make sure that is selected and " back out " of the menus.
Enjoy
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Right click on te screen and click on properity in the screensaver tab check the power setting to make sure it is not set to hibernate if so un check the boxs and check the shutdown time
Hi there. When you connect an external display, your laptop clones your desktop to the external display, including resolution settings. First you need to check what resolution settings the plasma can display. If your laptop is set to a resolution that the external monitor can't display, then you will lose the display once the resolution settings are loaded. You can change the laptop resolution in your Display Settings.
If you don't know what settings the external monitor can display, just open your Display Settings and set your laptop resolution to 1024x768. Almost all new monitor/tv's can display it. Connect your external display, and see what happens. If it works, but the resolution doesn't look right, then just move the resolution along one more, until you find one you're comfortable with.
N.B. Some monitors/tv's "jump" resolutions. i.e. the monitor can display 1024x768, 1300x768, but not 1280x800.
Another thing to remember is that if you are running Windows Vista, you may need to check that the Windows Mobility Center recognises the external display that you are trying to use. You can find Windows Mobility Center by clicking Control Panel, then Mobile PC. It should now be listed on the screen.
Let me know how it goes, and if it works, please rate.
when the windows are going in the booting and it is colored black,
the problem can be wrong with the windows or set the mode dual setting LCD 1st
graphic assign it, try to use external LCD Monitor or connect to back of
laptop
the problem was the y-sus board, i had a local tv repair shop diagnos that much for me. although, he couldn't fix it i did some research and found a company in california, itritek.com, who could. you send him the y-sus board and the two buffer boards and he not only repairs them but he upgrades them. apparently the y-sus board gets too much heat and eventually goes out, sometimes the buffer boards are affected too. itritek.com replaces the components on the y-sus board with better parts which are more heat resistent. i believe this will help you with your problem. let me know...good luck.
Icannot get a picture on the tv when connecting a laptop, I have gone into menu and selected pc in thr rgb mode, i can get teh sound but get a no signal when trying to get as picture, please can you help.
×