Wharfedale IN120-1 How do I record my own answering machine message?
I have recently been given this telephone but do not have the original manual. If anybody out there has it maybe they could help me as I've tried everything! I'm sure it's really obvious but there's no option on either the handset or the base to record your own message & I'm totally stuck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your Phone service is recording messages, that disconnects your line. You need to have them turn that feature off, OR set the answering machine to answer is less rings, say two or three. If the FAX machine listens to the line, it can still be set at a higher amount of rings, say four, and should still answer any FAX signal as it's sent to the answering machine.
Click icon under download....then save..remember where it saves it. Usually when the machine will not record messages there are only a few things that can be wrong....check the Telephone Answering Machine(TAM) section.
You might need to erase all the data and/or change to the correct mode for the phone to function properly. Obviously having the manual will help! :-)
Generally, Answering manchine have serveral function. Like . Record anoucement, record message, playback message, delete message, answer machine on or off, answer machine remote access. Normally , the key laid out is simular too.
Here is a link to your owner's manual:
Recording Your Announcement
Before using this answering system, you
should record the announcement (up to
one minute long) that callers will hear
when the system answers a call. If you
choose not to record an announcement,
the system answers with a prerecorded
announcement: ?Hello. Please leave a
message after the tone.?
1. Press and hold ANNC/SKIP. The system
beeps. Speak toward the microphone
normally, from about nine inches away.
While you are recording, the Message
Window displays ?.
2 To stop recording, release ANNC/SKIP.
The system automatically plays back
To review your announcement, press
and release ANNC/SKIP.