When the tv has been on a while - and we turn it off - then come back to turn on again - we get the expected flashing yellow / orange light - then it turns red (stays off). After numerous trys it will generally come back on - or we just leave it off a while longer and it starts - such as when we shut it down for the night and turn it on in the morning it comes on like normal. I had one person suggest the lamp may be getting ready to go out - but there is no orange lamp condition light on.
After tv on 2 min tv cuts off red indicator light for the lamp comes on and then the set set cut offAfter tv on 2 min tv cuts off red indicator light for the lamp comes on and then the set set cut off
set started out play for awhile then cut off ,I replaced lamp now fan motor behind lamp does not work and tv will not come on .anyone have a solution to this one?HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!set started out play for awhile then cut off ,I replaced lamp now fan motor behind lamp does not work and tv will not come on .anyone have a solution to this one?HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had this same problem. The Zenith rep told me to unplug the TV, hold the power button down for 30 seconds, plug it back in and then turn it on. It worked and I haven't had a problem with it since. I hope this helps. Good Luck!
not very hard just expensive but i am told you can get them for between 80- 250 so look around (including ebay)
this site hill help: http://guides.fixyourdlp.com/zenith/3110V00139B.php check out this instruction too: http://en.allexperts.com/q/TV-VCR-Stereo-1749/D52WLCD-Zenith.htm
Has Lamp been replaced? Also if Blaster board is bad Lamp will not turn on also CK Fan behind Lamp If it is not running Set will not turn on For Parts Try Encompass 1-800-639-3328 or look on line www.Encompass Parts, Also Look on E-Bay for Lamp and Blaster Board I found Lamp fot mine for 85.00 and blaster board for 55.00Type in Model number it will be on back of your TV.
Go to the Zenith repair site. This has been resolved in a lawsuit. Zenith will fix it free of charge through 7/1/2010. The shop just picked my up to replace the light engine free of charge. Call 1-800-228-1757, have your model number and serial number, and where you purchased it. Here's the neat thing-the question I asked is "have they fixed the problem with the light engine, or is it going to keep going bad?" If happens again (blue lines/spots) before 7/1/2010, they'll replace the TV with a new and different TV of equal value!
TV Goes off after 1 or 2 mins of play Red lamp indicator on
After tv on 2 min tv cuts off red indicator light for the lamp comes on and then the set set cut off
set started out play for awhile then cut off ,I replaced lamp now fan motor behind lamp does not work and tv will not come on .anyone have a solution to this one?HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!
×