On the camera it says "internal memory full" and i wanna know how can i fix it ?

If you can connect the camera to your PC via a cable, normally USB, to browse the contents of the camera's internal memory then try simply to do a search on the camera's 'drive' for .png, .jpeg or .jpg, .bmp or any other filetype that your camera would use.
Your PC should be able to find any files using those file types and display them. From there you can copy or cut and paste them to a location on your PC's hard drive.
You may have to make sure that your computer has Show Hidden Files and Folders turned on under Folder Options.
Normally, a camera saves all videos and pictures in a folder called DCIM, even on internal storage.

might be disprogramed the whole camera and does not regonice the chip and the camera

Hi, That can be fixed by putting a memory card into the camera. It can take a SD card or a XD card. SD's are easier to find and tend to cost less. Once you buy one you put it in the bottom of the camera in the same compartment of the battery and then you'll be able to take more photos. If you need more help let me know =)

Usually, an 'internal memory full' message means that you do not have an external memory where the camera can store its pictures and that it is currently using the internal memory of the camera that can store around 5-10 pictures only. So, the best option is to buy an external memory fcard for your camera. Bring your camera when you will be buying one so that the store clerk can provide you the right memory card.

put the camera in playback mode so you can view the pictures. As you view each picture push the menu button and choose delete. Delete each pic this way and your internal memory will be clean

With no card in the camera, go into the menu and find "format" and follow the on-screen instructions.

apni gaand me ghaal le in camera nu

The internal memory, as opposed to any memory card you may have inserted, is quite small. The fix is to use a good sized memory card, or maybe a couple when you are on holiday, so you can fill one and then put in a new empty one, like people used to change films.

It's the built in memory of that camera that's full - this is NOT the card.

Your camera is set on internal memory.
You must incert a memorycard and go into menu, Cam. Settings and find AUTO or SD card option and change to AUTO. If the cam cannot read the memorycard it will wutomaticly go back to internal memory.