I can not find a replacement remote for Zenith AM/FM Clock radio model #Z212B. I know the manufacturer does not make them any more and I have contacted 1-800-Remotes and NLARemotes without any luck. Any suggestions?
SOURCE: Radio controlled clock won't set
I'm sorry to hear that.
It sounds like no pulse signal is being received by the clock then. This can only mean the transmitter site has a long term problem, which is unlikely. Or your clock's receiver is faulty. Sorry, cannot offer any other suggestion. You could just leave it running, it may pick up a pulse eventually and get back on track. I guess there is nothing to lose in trying, except a couple of batteries.
Take care now!
SOURCE: La Crosse atomic clock model #WT-3143
don't push any buttons at all untill the clock has at least 15 minutes to communicate with the transmitter.
SOURCE: Instructions to 'science museum' radio controlled alarm clock
press the alarm button (so the alarm time is on the screen) then the + button. do the same to deactivate the alarm.
it took me forever to work this out after losing my instructions, feel a bit of an idiot now it seems so simple
SOURCE: i have a radio controlled clock they told me it
Hi Follow this link for a copy of the clock instructions http://www.precisiontimekeepingshop.com/WebRoot/Store3/Shops/es119696_es124040752439/4A01/ADE9/E32C/D6DB/8872/50ED/8971/B0A9/PREC0007_0020_Instructions_0020_copy.pdf
SOURCE: My WWVB radio controlled quartz
these really aren't atomic clocks and are set at the factory. It receives, it's LF signal out of Colorado and should correct itself. If not contact the manufacturer.
130 views
Usually answered in minutes!
×