Question about Zenith D60WLCD 60" Rear Projection HDTV-Ready Television
The top two corners are the correct blue color but the rest of the screen is dark blue. Also because of this the white has a yellow cast to it. I dont know it something moved during the move or if there is a bad part. the optical engine has all the mirrors is there some thing to adjust or clean in there. Any ideas would help.
Go to zenith.com, look under the service icon at the top and then you should see a listing for "Class Action Lawsuit/Settlement". If you follow that link, they'll have specifics listed for this suit that was brought against them (including tv model #s included in the suit). There was an agreement reached to fix/replace affected t.v.s, court date was in Feb. I believe, and just waiting now until they post information on how to proceed.
Good luck and hope that helps.
Posted on Apr 02, 2009
I was unaware of a "Class Action Lawsuit/Settlement" on a Zenith LCD TV that I purchased. I never received a notice from the Law firm or the Manufacturer. I only discovered the lawsuit, after I developed a problem with the TV and decided to do a google search. I did not respond and make a claim within the 120 day period that the lawsuit/settlement was settled. Apparently my problem developed 28 days AFTER the Claim date expired. When I contacted Zenith, I was told that they would not repair the unit because I did not respond in time. Since there was an inherent design flaw that caused my issue and I was not served with any paperwork and was unaware of the lawsuit/issue-do I have any recourse. It is a $5400 TV and the repair cost is $3000. It seems unfair.
Posted on Jul 31, 2010
ADVERTISEMENT/SOLICITATION FROM AN ATTORNEY REGARDING A LEGAL ACTION AGAINST ZENITH/LG If you are interested in speaking with an attorney at no cost and/or joining a class action lawsuit concerning the blue screen/haze problem on Zenith and LG rear projection LCD televisions, please contact Daniel E. Sobelsohn by phone or email: Daniel E. Sobelsohn, Esq. The Sobelsohn Law Firm 1901 Avenue of the Stars 2nd Floor Los Angeles, CA 90067 direct dial telephone (310) 461-1333 facsimile (310)861-5205 [email protected]
Posted on Oct 20, 2006
[email protected]/ solution I had the same problem with the five I have. Now, I am down to 4. Change the engine assembly. I am looking to buy some good assemblies for these zenith please E-mail me and let me know where I can get some.hope I help someone.
Posted on Jan 21, 2009
Tips for a great answer:
Mar 30, 2016 | Dodge Cars & Trucks
Sep 21, 2015 | Samsung Televison & Video
Apr 08, 2015 | VIZIO M701d A3R 70 Inch 1080p Smart
Apr 28, 2012 | Quantaray 55mm Red R2 Lens Filter
After turning on the projector, press "+" and "-" buttons on the control panel
simultaneously for 3 seconds and release the buttons when screen goes blank.
2 Press "+" and "-" buttons again to exit the diagnostic mode.
3While in Self-diagnostic mode, the screen will run a seven-color-cycle test as
Red--> Green--> Blue--> White--> Watchet Blue--> Dark Green--> Yellow.
Ensure that the colors of the test pattern are correct. Contact Dell if the colors are
not displayed correctly.
Mar 02, 2011 | InFocus LP 250 Multimedia Projector
Mar 01, 2011 | Dell 2400MP DLP Projector
Apr 13, 2009 | ViewSonic PJ500 Multimedia Projector
Jan 15, 2008 | RCA P46810LV 46" Rear Projection...
4,043 people viewed this question
Usually answered in minutes!