Question about GE - General Electric 29255GC2 Phone
check out the lenmar.com site. they sell a replacement NiCad battery for that phone. i'm in the process of replacing mine.
Posted on Mar 31, 2008
Press down key until the handset menu appears and press "INT/OK" key
Press up or down arrow key to select the submenu "Resgister" and press "INT/OK" key
Handset display shows "SEARCHING".
Press and hold "page" key on the base station more than 4 seconds until acknowledgment signal is heard
Enter the PIN (default setting = 0000) and press "INT/OK" key
on the Handset
If the input PIN is correct the registration procedure will be completed with a confirm tone.
After a connection is established the name and number of the handset appear in the display
Note : The base will be ready for registration for 10 minutes when the page key is pressed and held for more than 4 seconds.
Please let me know how these phones have performed, are you happy with them. Thanks
Posted on Jun 28, 2008
I use a ATT calling card I put the 1-800 number and stored it in A then stored the pin# in B it will go throught ,so try to dial it in
it still will work . But the same works on our phones.Could it be dialing in an Area code?
Posted on Jul 28, 2008
SOURCE: manual for ge cordless telephone
I purchased a cordless phine that comes with two additional lines, the other two arent working because they say they need to be regestered I cant find the manual that came with the phone how can i regester them?
Posted on Oct 14, 2008
Tips for a great answer:
Dec 26, 2011 | GE Lands Phones
Jul 28, 2011 | Cell Phones
May 01, 2010 | Lands Phones
Mar 30, 2010 | GE Telephone pr521w
Mar 05, 2010 | Uniden Cordless Phone
Aug 25, 2009 | GE 21091GE3 2.4GHz Dual-Handset System...
Jun 25, 2009 | Uniden Cordless Phone
Jun 07, 2009 | GE 29267GE3 Telephone
202 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: