Whirlpool washing machine parts suppliers - Kenmore Washing Machines

go to repairclinic.com and type in your model number. look for the drain pump and when you find it, the site shows you the manufactures pump part number

I'm not sure what you mean by "new dog ears".
Washing machines like the one pictured, generally have a transmission that is driven by the same motor that drives the pump, agitator and spin cycle. The motor has several windings for different speeds. There is a transmission that changes gears for the different motor functions. This is all controlled by the timer [big knob in your picture] and connected by a V belt.
First do a Google search for the model number and add "parts" to the search. You will get a few pictures of how the machine is built and what parts are available

I would suspect the timer first, the belt second and the transmission third. There are many on line parts suppliers once you have diagnosed the problem further.
Whirlpool Washer Parts

BAD WATER INLET VALVE

Hi from retired Englishman in SW France,

Spares Suppliers
You will need to type into your search engine/web browser '(make) washer spares' and you should be presented with a number of sources from which you can order. During the process you will be asked for the actual model number and, of course, the item ;-0)
Alternately you could try telephone directories for spares suppliers but I would think the former would be more successful.
Good luck,
John C.

Hi,

May I suggest that you go on line, type in the make of your particular machine into your search engine. You should then be presented with sources of spare parts suppliers and possibly the manufacturers site. With a bit of luck one or all of them should give you the opportunity to type in your reference number and inform you how/where to obtain it.

Hope this helps and good luck!
John C

LSQ9549LG0 I think is your model number. Here is a link to a parts supplier if you need to order.

Happy Holidays! Richard

You were over charged for that bellow.

The retail price (if you purchased from Whirlpool) is $128.01.

A parts supplier typically sell is for about $97.00.

A service tech typically sells it for less (about $85.00) because they are making money on the labor and sometimes other minimal charges.

You can do an internet search on some online Whirlpool parts supplier buy inputting your model number. From there you can find your bellow/front dub seal/ door gasket on the “Door and latch parts” page.

These are two links to see your bellow and their listed price.

http://www.appliancepartspros.com/part_details.aspx?part_id=3597347

http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=GHW9400PW1&productCategoryId=0153200&brandId=1198&brandDescription=WHIRLPOOL&modelName=RESIDENTIALWASHER&diagramPageId=00002&componentDescription=DOOR%20AND%20LATCH%20PARTS&documentId=W0512131&blt=06

Now keep in mind, most of all the online parts suppliers will not give you the Whirlpool part number because they want you to buy the part from them. The part number you will see is usually a made up number by that web site.

Good Luck

Your heating element circuit has failed in the washer. We are Whirlpool authorized service and parts suppliers and can get the correct part out to you asap.

Please contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service
We are at your service from 7 AM until 9 PM CST Mon – Sat!

Thanks, Ella :>)