iPhone Apps Logo

Related Topics:

Question about iPhone Apps

1 Answer

How do I pair my jabra easygo to my I phone 4s?

Posted by takehoe on

Ad

1 Answer

Ryan Mason

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Detailed instructions can be found by downloading the user manual from the Jabra support page.
PAIRING IT WITH YOUR PHONE1 Put the headset in pairing mode- When you turn on your Jabra EASYGO for the first time, theheadset will automatically start up in pairing mode, i.e., it isdiscoverable for your phone. When the headset is in pairingmode the Bluetooth status indication on the StatusDisplay isflashing.2 Set your Bluetooth phone to discover the EASYGO- On your iPhone 4s, go to settings>General>Bluetooth and make sure Bluetooth is turned on.3 Your phone will find the Jabra EASYGO- Your phone will find the headset under name Jabra EASYGO.Your phone then asks if you want to pair with the headset.Accept by pressing Yes or OK on the phone. You may beasked to confirm with a passkey or PIN. Then use 0000(4 zeros). Your phone will confirm when pairing is completeand the Bluetooth status indication on the StatusDisplay willshift from flashing light to steady light and the headset voiceguidance will say connected.
Manual pairing modeIf you wish to use the headset with a different phone, or if thepairing process was interrupted, you can manually set the headsetto pairing mode.Make sure the headset is on. Press and hold the answer/end buttonfor approximately 5 seconds until the Bluetooth icon turns froma steady light to a flashing light. Then repeat steps 2 and 3 in theabove pairing guide.Connecting with your phonePairing is only needed the first time a headset and phone areused together. When the headset and phone have been pairedonce, they will automatically connect when the headset is on andBluetooth is activated on the phone. The headset can be usedwhen it is connected to the phone. If the devices are paired, butdo not immediately connect, tap the answer/end button. Whenyour headset is connected the Bluetooth connection icon in theSTATUSDISPLAY WILL BE CONSTANT ON FOR 3 SECONDS andthe headset voice guidance will say connected.

Posted on Mar 07, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

GALAXY 21 mobile paired to Jabra Tour 5G headset

Delete Jabra from Phone and reboot. Tell phone to search for Bluetooth devices. PRESS THE BLUTOOTH BUTTON ON JABRA! Now you are Paired. Make sure phone is not on Mute.

Jabra Tour - Support

https://www.jabra.ca > Support > Jabra Tour
Get support for your Jabra Tour. Find all product guides, resources and FAQs.

..
0helpful
1answer

Where can I get a user manual?

Hi Robert
See if Jabra Have One.... Search the Internet

You Bought Jabra.... One of the Best... so
They should have support

As in their Video Here
How to pair Jabra BT2045

EasyGo Jabra Headset Bluetooth Android iPhone

0helpful
1answer
0helpful
1answer

Jabra easygo driver

http://www.jabra.in/support/support%20for%20your%20product/downloads%20and%20drivers
0helpful
2answers

Cant pair my iPhone with jabra sp5050

forget the headset
turn bluetooth off
turn the headset device off
reboot phone.
try again
1helpful
1answer

How do I "pair" the Jabara Journey with a I Phone 5C?

most pairing when asked by the device requires a 00000 passcode
but you need to set the jabra and the iphone up for pairing
here is a link for jabra the iphone should see it when the jabra is set to set up mode..
http://www.jabra.com/support/Jabra-JOURNEY_100-47300000-15
0helpful
2answers

How do i pair my jabra easygo to my phone

Hold your blutooth switch on button at few second the light at bluetooth is starts to blink now open bluetooth menu in mobile select pared device and select search new device or go to blutooth menu and select search audio enhancement
1helpful
2answers

Where do I get the passkey to pair with my phone.

the passkey is 0000 you can find all of the quick start information at this link:
http://www.jabra.com/sites/mobile/ap-en/products/pages/jabraeasygo.aspx
thank you,
Lee
2helpful
1answer

First time pairing to bb9530 storm to jabra easy go doesn't work

You could try to force your headset into the pairing mode. In order to do it, with it turned on, press and hold the answer/end button for some 5 seconds, until the bluetooth indicator light is rapidly flashing. It is in pairing mode now. Then, withing the next couple of minutes, bring your phone close to your headset, and make its bluetooth application search for new devices. After a little while, your headset should appear on your phone' screen. Select it and command it to connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros). If the pairing process is successful, your headset will enter the stand-by mode. There could be an indication on your phone too, that a headset is connected.
Hope you are able to sort your problems out soon.
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Anyway, please, let me know if I can help you any further.
Regards, Carlos
Not finding what you are looking for?

1,712 views

Ask a Question

Usually answered in minutes!

Top Apps Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

ray gallant

Level 3 Expert

74163 Answers

john h

Level 3 Expert

28535 Answers

Are you an App Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...