Please tell me ,what is the c5707 equivlant

so many posts. with FAN belt posted.
now you add 800cc, finally.
very good that , and is not on our web sites. this is USA sites.
that means buy the FSM.
got to Chevy, walk in , to parts counter, ask for FSM on above.
we have alldata.com but no sparks here. zero
i bet your unstated country has no Alldata like equivlent .
so CHEVY dealer time.
what i do , if i buy new car, i dont take delivery with out the book for free. (i tell the sales man that, and it blinks and goes, YOU GOT A DEAL)
never home with out it or be a slave to dealers.
that is my grand pa advice, good luck.

contact your email customer service and tell them about the password problem.

im not over farmiliar with your bike but most bikes they are under the seat / tank aeria if it works at all it shuld make a cliking noise when the indicators are switched on


what lights are not working ? is it just the indicators or is it the back light and brake light as well ?


if its all then its proberbly a problem with the earth / negitive many bikes rely on 1 wire split in to 3 at the rear of the bike 2 for indicators 1 for the back light

Call Toll Free +1(888) 666-9320

Be sure the ac fan (mounted on the condenser) is working properly

you can contact the mobile service provider........

Hi, Please try doing this:

• 1. Go to: www.epson.com
• 2. Select Country
• 3. Click on Drivers & Support
• 4. Click on Printers
• 5. Click on Inkjet (or other applicable printer type)
• 6. Select your printer model
• 7. Select Drivers & Downloads (or just click the Windows link)

If your model is not listed, then this model probably isn't supported in the selected OS or isn't sold in that particular country. In this case, please try another country at Step 2.

i hope this helps.

That's pretty amazing the colour would fade unless it was set right in the window for a long time. In my country yes that would be covered under a warranty but, the part is still functional. The dealer may have a problem replacing a functional part. If it were me I'd also be upset that little or nothing was being done. However looking at it from the dealers side if he replaces it the cost of the part and the labor would come directly out of the sale of that motorcycle. If the part is a black plastic or vinyl in my country there is spray paint for that material. I'd suggest you remove the part clean and paint it OR suggest the dealer do this if you pay part of the expense. I know that's not what should happen but in this case may work for both parties involved.

First what kind of monitor and model.
Second, don't use the monitor if you can hear and or see problems, have the unit repaired or replaced.
The caps are easy enough to replace if you have the savy.... With no model number I can't tell what kind of unit you have but if you mean C5707 and not C707, you have a Dell or BenQ monitor.
The C5707 is a 8 amp NPN transistor.
I have removed and replaced about 20 sets and used a TIP3055 which is a 10 amp rated.
You should have 4 to be replaced.
You also may have to watch what size the caps are, as if too long, they will hit the shield.
Good luck.

look at the 3 amp. fuse on the mainboard! By the way, you can buy very cheap USB light, wich are working with a small lighttube. Use the transistors of their generator!