None of the buttons working, on TV or remote

SOURCE: Remote/tv buttons not working & start-up menu flashing

You can get an original replacement remote that will work all functions from Here: http://www.remotes.com/remotes/servlet/rs?o=c&a=Search&m=KV-27FS200&uid=11829594841080 Good Luck

SONY KV27FS200 Remote Control

remotes.com

Factory Original and Replacement...

Posted on Jun 27, 2007

SOURCE: remote control not responding

Perhaps you can try what I do when my KV24FV300 runs through channels and will not stop.  Hard to watch and remote will not work.  Nothing works but on and off from set. 

Sony Says:  Take all batteries out of ALL remotes that you use in any way for that set, VCR, etc.  ALL batteries out.  Turn TV off at set.  Unplug TV.  Wait at least 15 minutes then replace all batteries in ALL remotes.  Plug TV back in and turn TV on from set.

Maybe, just maybe it will work.  If it does not work why not call Sony, they always say that cannot happen but they have a solution for it.

[email protected]

Posted on Oct 26, 2007

SOURCE: Screen went BLACK!

My Sony FD Trinitron TV did samething, started flashing, then eventually went completely black with volume. I got on internet searched found a solution, i tried it, it worked. unplug tv, remove all screws, remove back. towards bottom right theres a transmitter with a couple of knobs, we plugged tv in and moved knobs around and it worked. Also was extremally dusty, we used computer duster for a better connection. hope it helps you

Posted on Aug 29, 2008

SOURCE: None of the buttons work on my TV

Try unplugging it for at least 5 minutes

Posted on Jan 08, 2009

SOURCE: Verizon FIOS remote buttons all work except

I had the same problem with a Sony Trinitron KV-32FS320 32" TV. I reset the remote to factory default.

• Press and hold STB
• While holding STB, press OK
• Release both keys, wait for device keys to blink twice
• Press 9-0-0. The STB key will blink three times

• Turn your television on
• Press STB to enter Set Top Box mode
• Press and hold TV
• While holding TV, press OK
• Release both keys, wait for device keys to blink twice
• Press 1-1-2-7. This is one of the Sony TV codes

• Program any other devices, such as DVD using procedure similar to above.

Posted on Jun 29, 2009