- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Tim,
I suppose it is the cooker of the photo, a Rangemaster Classic.
These doors open on the side.
There are 4 screws who fix them.
Unscrew them and you can take the door apartThe link is for the user manual. On page 18, fig 6.3 and 6.4, you find more information. http://www.rangemaster.co.uk/media/868812/toledo-lidded-110-dual-fuel.pdf
If auto is flashing, i would say the oven is waiting on a clock time to be set to determine when to start cooking and when to turn off. Try and reprogramme the oven to manual. Reset the clock time, It should work then.
where you clock is the buttons next to it, 2 have a line underneath joining to them both, hold them both down together to stop clock flashing, this will then allow your ovens to work, it's a safety feature on these ovens, and to reset clock keep both buttons held in and use the plus and minus button to set hope this helps Donna
push the button on the front of the stove that says "clock" and then turn the dial (same one you use for timer and oven temp) till you get the time you want, then LEAVE IT ALONE and it will set itself. Don't touch anything once you have the time set with the knob.
After a power failure most digital clocks have the zero's and auto flashing. These ovens will not work if clock(time of day) is not set. By pressing incorrect buttons, you can complicate things further. Recommend turning off power to oven for a few seconds, then follow manual for resetting clock, which is usually holding down the 2 buttons on the left hand side simultaneously, and holding down these two press the + or - key to advance clock.
×