Need CD-ROM for camera jvc GR-DX77 for windows 7

The internal battery needs replacing - it is kept charged by the main battery, but if that is not used, the other battery runs down as well.

Maybe, It doesn't work because the driver you installed is for other versions of operating system. I am also using windows 7 like you so don't you worry, You can still use your old installer/driver from other versions of operating systems. Just remember that before installing any program in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer first, then choose "troubleshoot compatiblity". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D

You can downloaded it here: www.jvc-victor.co.jp > Home > Contact & Support www.softwaredriverdownload.com/jvc_mini_camcorder_gr-d200u_usb_driver.html

Hello there,

Unfortunately, JVC is not offering the latest version of their Powerdirector on the website. You can however have the option to purchase it. This version already fully support Vista and Windows 7. Please see link below:

http://www.cyberlink.com/products/powerdirector/requirements_en_US.html

jvc GR-DX77AS is not working when connected to a laptop with windows vista. Is there is any solution for this

You can order it from JVC for $32:

http://www.jvcservice.com/Service/JPartInq.asp?PgReq=DspDta&PrtNbr=LY32210-079A

B. Phelps

I have the same camera and the original CD ROM. You need ImageMixer 1.7; it handles both USB and IEEE1394 (FireWire) transfers. The only place I've found to get it is from JVC

http://www.jvcservice.com/Service/JPartInq.asp?PgReq=DspDta&PrtNbr=LY32210-079A

or

http://tinyurl.com/3342lu

There is an ImageMixer 1.7 Upgrade available from www.imagemixer.com, and from

http://www.pixela-1.com/faq_jvc17/updates.htm

and they cost about $40 as well. Pretty steep.

need your help with the samething

http://www.helpdrivers.com/ingles/listado/panellis.asp?marca=JVC&perif=camaras2

check the charger output if it has an DC out voltage about 8.4 volts. If it does not have, your charger is effective.