Question about Panasonic Lumix DMC-LC33 Digital Camera

1 Answer

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on the cam its show (system error) please kindly help me for solving my problem. thanks in advance

Posted by wahabza6 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Try Klomtrix trick this worked with my camera thanks klomtrix

Posted on Nov 30, 2008

  • Bryan Seguinot
    Bryan Seguinot Aug 18, 2015

    amazing! worked perfectly. thanks!

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Lumix DMC-ZR1

This is a lens mechanism fault. USe can of air and spray on surrounding the lens For cleaning the dust. and then try.
1helpful
1answer

Camera lens will not retract - sistem error (focus)

Lens errors (system errors on Panasonics) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ... Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:
1helpful
1answer

Cannot format a maxwell class 2 4 gb card for my lumix dmc-lc33

The DMC-LC33 is designed to work with SD cards. Your 4GB card is actually an SDHC (Secure Digital High Capacity) card. While it fits into the slot it will not work. You need to use SD cards, 2GB and smaller.
6helpful
1answer

When i turn on my panasonic lumix dmc fz28 it shows system error

HI there the camera lens guide pin is damages and thats why not zoom the image properly . You got the system error message. So you need to replaced or repair the lens guide pin. Thanks.
6f1ef6a.jpg
0helpful
1answer

When I turn the camera on, the lense expands and then retracts. The viewer then displays "system error"

there is no image formation,u cannot see image on ur lcd/veiew-finder,allienment of the lens unit is defective/sensors of the lens unit problem,so take to a camera tec.
0helpful
1answer

System error

What is the error message and the brand of camera.
0helpful
1answer

Panasonic Lumix DMC-LC33

hello,
i had the same problem , and i tried
Klomtrix solution on the same website, it worked for me thanks Klomtrix sethu
0helpful
2answers
15helpful
7answers

Error message

*&%[email protected]#%^&*&^% !!"It's working!!!! Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this. Do it under your own responsability. (any way your camera does not work). When you turn on the camera wait until the lenses come out, in that moment grab the lens with your hand and don't let it go back. The camera will turn off but the lens will stay out. With the camera off push in the lens with your hand. Turn on the camera and that's it. I had to do it 2 times, but now my camera it's working again. This system error could be caused because the lens get out of it rail and the camera can not set the focus system.
0helpful
1answer

Lumix DMC-LC33 system error

I had the same problem, just shake it abit ... I guess the camera is getting old and something is kinda of lose .
Not finding what you are looking for?
Panasonic Lumix DMC-LC33 Digital Camera Logo

488 views

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76823 Answers

ENFORCER

Level 3 Expert

38673 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...