Question about Nikon Coolpix 5700 Digital Camera

1 Answer

In camera mode, screen shows a blend of image and digital spectrum analyzer bars blurring the image

Viewfinder and LCD display images from CF Cards ok, but in Camera Mode, the viewfinder and LCD show a distorted image which consists of a blend of the image through the lens and a moving set of digital spectrum analyzer bars that blurr and distort the image. Seems to be problem in the CCD image digital processing. Tried setting back to default settings. Tried setting different sensitivity. Any suggestions on how to fix?

Posted by wayne clark on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

The ony way is to get the CCD replaced with a new one. Contact NIKON for free replacement as this comes under manufacturing defect.

Posted on Aug 20, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Viewfinder shows blurred images

First, rotate the mode selector dial to "Auto", then check to ensure that you're not in macro mode. Also make sure that your lens is clean and there are no smudge marks.

If you've done all the above, and you're still getting blurred images, this then might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check this link for more info.

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 30/30a/200a/300a/D320/400/ 450/500
3helpful
1answer

S1IS canon camera

Hi,

Apparently the vendor-supplied CCD image sensor used in this Canon digital camera may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all.

To determine if the CCD (image sensor) is working properly, follow these steps:

1. Insert a memory card with known good images on it into the camera.

2. Power the camera on to the Playback mode.

3. Press the DISPLAY (DISP) button to enable the LCD panel, and observe
the LCD.

a. If the images are displayed properly, please proceed to step
four.

b. If the images are not displayed, or a "NO IMAGES" message
appears, please ensure that the memory card contains known good images.

c. If the card contains known good images, and the issue persists
with a second memory card, the camera will require service.

4. Switch the camera to the Camera mode. You may use any shooting mode
(i.e. Auto, Manual).

5. Press the DISPLAY (DISP) button to enable the LCD panel.

6. Point the camera at a well-lit scene and observe the LCD and/or
viewfinder. If the scene the camera is pointed at appears on the LCD
and/or viewfinder, the CCD is operating properly. If the LCD and/or
viewfinder remain black, the camera requires service.

Effective immediately, and regardless of warranty status, Canon will
repair, free of charge, products exhibiting the above-mentioned
malfunction if the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair.



Regards.


1helpful
1answer

Samsung Digital camcoder VP-D305i : LCD image blurred

did you ever find a solution to this problem ?
0helpful
1answer

Samsung Digital camcoder VP-D305i : LCD image blurred

OK IF YOUR PRERECORDER VIDEO'S PLAYBACK CORRECTLY THIS IS THE CCD AND CANON WILL FIX FOR FREE. THANKS TO SONY
0helpful
1answer

Canon PowerShot S1 IS Watercolors

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500
0helpful
1answer

Blur image in viewfinder and LCD display

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500
0helpful
2answers

LCD screen & viewfinder are being distorted

Failing CCD- if less than a year old return to vendor. If more than a year old contact Canon This may be eligible for free replacement- due to a faulty batch of chips that were in circulation used my many makers,
0helpful
1answer

Lcd screen does not display viewfinder image

That is normal. Didital SLRs are different in this respect from digital compacts .
1helpful
2answers

LCD Monitor on ,and the Electronic Viewfinder turned off

If you turn on the back LCD, the electronic viewfinder will remain on while in a shooting mode. There is no setting on the camera to use only the back LCD monitor while shooting. If you playback images in the Play mode, only the LCD monitor will turn on. However, if you press the Monitor button while in the Play mode, than the back LCD monitor will turn off. The image will display only in the viewfinder LCD.
Not finding what you are looking for?
Nikon Coolpix 5700 Digital Camera Logo

251 views

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

Ekse

Level 3 Expert

13435 Answers

Brad Brown

Level 3 Expert

18789 Answers

Steven Wander
Steven Wander

Level 3 Expert

596 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...