Quick release plate for vivitar tripod

SOURCE: quick release plate for quantaray tripod

Here is the response I got for tripod parts:
********************* The panhandles you need for the cost $5.95 each + $4.40 shipping and handling. The item #'s are TP1-62099-33001 and TP1-62099-33002. For two the total would be $16.30.

You can send a check or money order made out to ToCad America or you can call with a Visa, American Express or Mastercard number. Our address and phone number are listed below.

Thank you,

Gloria
Gloria Hoerr
Customer Service

ToCad America
53 Green Pond Road, Suite 5
Rockaway, NJ 07866

Tel: 800-886-2236 ext.119
[email protected]


Hope it helps.

SOURCE: need a quick release plate for Dynex tripod 60

The Velbon QB-4W Quick-Release Camera Platform is a nearly identical replacement for the plates that come with the Dynex DX-TRP60 tripod. You should have had a spare in the bottom of the tripod bag when you bought the unit. The Velbon QB-4W is available at many on-line sources for about $5.95.

Good luck,

Swarf

SOURCE: What type of quick release is in VCT-r640 SONY TRIPOD

http://www.tripodquickrelease.com/Sony_Quick_Releases.htm
they don't have that model listed, but they seem willing to try. Several people are thanked for finding out which plate fit which tripod.

SOURCE: Missing tripod quick release plate for AMBICO v-0552

Try www.TripodQuickRelease.com They stock a 41mm and a 45mm plate that may fit your tripod.

SOURCE: My Targus MX 1000 tripod is missing the quick release connector.

http://www.tripodquickrelease.com/Wal-Mart_Quick_Releases.htm