Lexmark t654 reset maintenance count - Lexmark T654DN MONO LASER PRINTER

To reset the maintenance count 1. Turn off the printer 2. Press and hold the 2 and 6 buttons simultaneously. 3. Turn on the printer. 4. Release the buttons after 10 seconds. The Configuration Menu appears on the LCD. 5. Touch Reset Maintenance Counter from the Configuration Menu. 6. Reset Maintenance Counter appears in the header and Yes and No appears below the header. 7. To cancel the reset operation, press Back or No. All other button presses are ignored. 8. To initiate the reset operation, select Yes. The maintenance count resets to zero and the LCD returns to the Configuration Menu

Fuser's don't have a 'reset'.....they just get hot and melt the Toner onto the paper.

I think you mean "how to reset the maintenamce counter".

Go to this page and watch this video for replacing the Fuser Kit on your model printer.

Lexmark T650 T652 T654 Fuser Maintenance Kit Replacement and How to...

A Google search provided some good details on this subject:
http://www.printertechs.com/maintenancekit-instructions/101-lexmark-t650-t652-t654
or on YouTube here is one example:
https://www.youtube.com/watch?v=wbygUpab7Fg

Hi,

I jsut followed the instruccion with a Lexmark X544 but i cant see the "Reset Maintenance Count". I could get de CONFIG MENU by holding the /check) and (right arrow). I move in the menu but none of the lines is anything related to "Reset Maintenance Count"

Enter diagnostic mode:



1. Turn the printer off.
2. Press and hold the Go and Return buttons.
3. Turn the printer on.
4. Release the buttons when Performing Self Test displays on the operator panel.

Once you're in diagnostic mode, go to Printer Setup > Page Count.


To reset the maintenance page count to zero:

1. Select Reset Maintenance Count Configuration menu.
2. Pressing Select resets the maintenance page counter to zero.

Reset Maintenance Count Saved displays momentarily. When the reset operation is complete, the menu returns to the Printer Setup Reset Maintenance Count screen.

Press the button with a key logo ( menus) until Busy/Waiting appears. This will give you an option to reset the printer.
For futher assistance please contact Lexmark Technical Support.

This is a lexmark based machine with IBM logo's
1 of the 2 options should get you squared away
---- Option 1 ----
To enter the Diagnostic Mode:
1. Turn the printer off.
2. Press and hold the Go and Return buttons.
3. Turn the printer on.
4. Release the buttons when "Performing Self Test" displays on
the operator panel.
This counter is reset by the servicer after a "80 Scheduled
Maintenance" message displays (300K copies) and a maintenance
kit is installed.
To view the Maintenance Page Count:
1. Select Maintenance Count Value from the diagnostic menu.
2. Press Return to go to the previous menu.
To reset the Maintenance Page Count to zero:
1. Select Reset Maintenance Count. Pressing Select causes the
maintenance page counter to reset to zero.
- Reset Maintenance Count Saved displays momentarily.
When the reset operation is complete, the menu returns to
the Printer Setup Reset Maintenance Count screen.
---- Option 2 ----

Maintenance page count
This counter is reset by the servicer after a 80 Scheduled Maintenance message displays
(300K copies) and a maintenance kit is installed.
To view the maintenance page count:
1. Select Maintenance Count Value from the Configuration menu.
2. Press Return to go to the previous menu.
To reset the maintenance page count to zero:
1. Select Reset Maintenance Count from the Configuration menu.
2. Pressing Select resets the maintenance page counter to zero.
Reset Maintenance Count Saved displays momentarily. When the reset operation is complete,
the menu returns to the Printer Setup Reset Maintenance Count screen.

There is a great video that shows step by step how to install the fuser, transfer roller, charge roller, pick up tires and then reset the 80 Scheduled maintenance message

I'm assuming you mean the maintaince counters... Turn off the printer. Press and hold the check and right arrow buttons on the front of the printer
Turn on the printer. Release the buttons when Performing Self Test displays. The message CONFIG MENU displays on the top line of the operator panel. Select Reset Maintenance Count from the Configuration menu. The message Reset Maint Cnt=Reset displays momentarily. Press Check to reset. When the reset operation is complete, the menu returns to the Printer Setup Reset Maintenance Count Screen. Scroll down to the Exit Configuration Menu and Press Select to Return to Ready status.

1. Turn off the printer. 2. Press and hold (check) and .(right arrow). 3. Turn on the printer. 4. Release the buttons when Performing Self Test displays. The message CONFIG MENU displays on the top line of the operator panel. 5. Select Reset Maintenance Count from the Configuration menu. 6. The message Reset Maint Cnt=Reset displays momentarily. Press (check) to reset. When the reset operation is complete, the menu returns to the Printer Setup Reset Maintenance Count Screen. Scroll down to the Exit Configuration Menu and Press Select to Return to Ready status.