My amana microwave model is acm2160as and the turntable will not spin the glass tray. I can actually lift the brown plastic turntable from the center ring and it looks as though the center ring has some sort of nub that should fit into the turntray that might be broken... any help greatly appreciated!!My amana microwave model is acm2160as and the turntable will not spin the glass tray. I can actually lift the brown plastic turntable from the center ring and it looks as though the center ring has some sort of nub that should fit into the turntray that might be broken... any help greatly appreciated!!
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would use epoxy glue allow it to dry 24 hours for maxium bonding, clamp it in place for best results, otherwise the door would probably need to be replaced.
2 things... the little microswitch can be open... there should be three one is open Your door latches go into/betweem them. .on the print it would be called the monitor.. replace that should work ! OR ... yuo could have a open thermal cut out... them are located on the magnetron and on the oven cavity, they will look like these are microswitchs just hook the new wire to same pins the one in the mico may ony have 2 use those same two on the new switck forget about the extra pin in.... you will see a diagram on the side just do the new the same way N.O. or N.C...take your time .... please and pull the plug 1st
My amana microwave model is acm2160as and the turntable will not spin the glass tray. I can actually lift the brown plastic turntable from the center ring and it looks as though the center ring has some sort of nub that should fit into the turntray that might be broken... any help greatly appreciated!!
×