Hoover PE235 Front Load Washer Logo

Related Topics:

Question about Hoover PE235 Front Load Washer

1 Answer

Hoover PE235 Just installed my PE235 again (been sitting in garage for a year), however when I started it first time i hadnt turned the water taps back on... Now the machine doesnt fill up? When i put it on program 4 the machine just makes a humming sound and does not start the cycle. Obviously the taps are both on now. Paul

Posted by Paul Petrie on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 163 Answers

Stock is the dangerous condition for mechanic parts, knock the water in take with a plier not to strong but strongly do this when the humming sound, check for cloged hoses too..good luck

Posted on Aug 10, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Machine overflows from front (powder compartment) on starting; cannot appear to clear flow pipe into machine -tried vinegar solution

Pour a jug of water in the soap tray and make sure it goes away fairly easy indicating the tray or hose to drum is not blocked, if flows okay try reducing water pressure to machine only .....
0helpful
1answer

Split water pipe

The only thing you can do is purchase the correct pipe and replace it. It is not worth trying to seal or tape the pipe, these repairs seldom work for any worthwhile time.
0helpful
1answer

HOW DO I GET TO THE FILTER WHERE IS IT ?

Hello,

Unplug the washing machine and turn off the water.

Open the small trap door next to the drain hose connection on the back of the washer to gain access to the filter.

Good luck
2helpful
1answer

Cleaning solution will not dispense

After sitting for a period of time, some of the solution may have dried in the inner walls of the feed tube from the solution tank. What I would suggest is to empty the solution tank and then fill it with hot tap water, put it back on the Floormate, and hold the solution "feed lever" on until it starts dripping water. The hot water will hopefully disolve the dried solution and allow it to flow again.

I hope this helps! :)
0helpful
1answer

[email protected]

Sounds like you have a blockage in the filter or the motor brushes have worn down.
Adrian
0helpful
1answer

Asko D1716 won't start

Ensure the water is turned on and the door is fully closed, make sure delay start is not set.....

if DW still won't start, I would begin by checking the door switch.

This link will download the owners manual for your unit. Click here
to download the manual.

Hope this helps.

Please take the time to rate this solution.
0helpful
1answer

Hoover hnl6166 front load washer problem

You have to open up the top to check the one pipe going into the softener compartment. You can even peep when the machine is running the soft run to see if water flows into the compart. If this does not work dismantle the compartment totally to check. Maybe the screens at water entry has clogged over time.......
1helpful
1answer

Hoover pe235

Contact Hoover, they should be able to supply you with a new dial for not a lot of money. Warranty won't apply as it wasn't their fault. Good luck.
Not finding what you are looking for?

131 views

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Oloyede Monsuru

Level 3 Expert

1468 Answers

Mike

Level 3 Expert

4382 Answers

Brad Brown

Level 3 Expert

19008 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...