D link dsl 2760

For routers not just the power light that should be lit. Are you using a modem/router? If so, there should be a DSL,INTERNET,WIRELESS light indicator as well. If the DSL light is OFF,steady red, OFF there might be trouble with your line connection. Call your Internet provider. Also, check cables (yellow cord, gray cord, telephone cord) that should be connected tightly to where it supposed to be connected.

Try D-Link Support, may be a firmware issue? Here: http://www.dlink.com/us/en/home-solutions/connect/modems-and-gateways/dsl-2640b-adsl-2-wireless-g-router-with-4-port-10-100-switch

view this http://superuser.com/questions/152499/dlink-dir-615-suddenly-stops-working-orange-internet-light

Hi.
look at your dsl L.E.D
if the lights blinking, meaning there is a problem on the DSL line and you need to contact the service line provider to solve your DSL line.
(Good DSL line if the DSL L.E.D light is not blinking led (stable)

regards

Verify the connections are correct, The WAN port should be connected to the Cable/DSL modem. Then do a hard reset (hold in the reset button for 30 secs). If this doesn't work, try another router to isolate the problem.

contacte the DSL provider

Hi Newross,

Is the dsl light is on the modem, no, if not , you need to login into the modem to switch on the wireless on the modem.

Just tell me what is the make of your modem i'll tell you how to actv wlan or elase ring your bb support.


Cheers......

May i sugest that you get a replacment rounter.

don't go for the cd you configure your self abd it think that your dsl not get the perfect dsl link

Yes, you can use wireless router with the modem. I guess the actiontech DSl router that you have is also Wireless one. If so, you can use just the DSL router for wireless connection. If you really want to use Dlink router with it, Connect the ( WAN port ) of the Dlink router to the ( LAN Port ) of the Action tech modem [ modem(LAN)-->Dlink(WAN) ]. Once you do this connection, better to do power cycle ( unplug the pwr to the dlink first, then, disconnect the pwr to action tech - wait 1min and plug the pwr to modem, wait for DSL light to be solid , then put the pwr back to dlink ). Make sure DSL light on the modem solid, internet light & WLAN light on the link glowing.
- Make Hardwire connection between the computer to Dlink and check the ip address on the computer whether it acquires the ip address from Dlink and then check the internet connection on the computer, it has to work. if computer not getting ip from dlink, try restarting computer.
- If hardwire connection on the dlink works fine and check the wireless connection.

For wireless configuration or assistance you may check this link:

http://www.portforward.com/help/wirelessxp.htm


please feel free to ask, if you have any more assistance.

- Laxman