Rca ps27113 tv will not power up

use the search button on the remote with the tv on.. wait until you are able to turn it off with the remote..

No,if ur tv is hookup to pay cable or or pay satalite dishes or Verizon FIO or ATT U VERSE signals.

The Proscan brand was licenses to ONCorp. Thomson/RCA does not sell them anymore. http://proscanus.com/default.asp?mn=4&id=infor You can call them and they may be able to direct you to where you can get the user guide/owners manual.

You can find many remotes for these TV's all over the net... just do a search. RCA universal remotes will also work. Generic Universal Remotes will also work... just make sure they have the function keys that you need for what you do on your TV. (PIP, etc.)

You can tune to 90 for input 1 S-video, 91 for input 1 composite and 92 for input 2 composite only.
Most RCA and GE brand replacement remotes will work using code 000, or 001. I use code 237 for my 5 in 1 remote and can get PIP and the setup displays to work.
tom

Connect a set of bookshelf speakers to the red/black connectors on the backside of the set, and switch to 'external speakers'. A lot easier than trying to find the originals.
tom

Likely the capacitor or diode in the pincushion circuit. Blue box on the chassis near the HOT.
tom

You need to adjust the aspect ratio.

Where the fuse are put it on the board get the capacity always be 150 volts 5 ampers

Good day.
Owners manual can be downloaded through the website
PortableMedia.ManualsOnline.com

Log to this site and you can download infos that you need.

Response is highly appreciated.


chris

I used the remote control code of "69" for Thompson which makes GE & RCA according to another post. This worked to program the remote of my GO Video DVD-VCR for the TV