I have thi tv for about 2 yrs. i had it storage for about 6 months. now when i put it back in my apartment. it doesnt come on. when you turn the power on the standby led blinks ten times like normal and then goes off. then starts blinking again. like it wants to come on but nothing. no sound no picture. i could really use any ones help on this.
thank you,
adam
An expert who has achieved level 3 by getting 1000 points
All-Star:
An expert that got 10 achievements.
MVP:
An expert that got 5 achievements.
President:
An expert whose answer got voted for 500 times.
Master
3,130 Answers
Re:
The blinking led or light is an indication that the sweep or horizontal sweep circuits not working or giving the power supply as well as the microprocessor the requird pulse to start up properly. Of course this problem could be anything from a contaminated printed circuit board, a cold solder connection or a part falure. unfortanatly, this is a solid state sewt and all parts are soldered into place so there are no user serviceable parts inside this set. your better off calling in a pro as there is alot of hi voltage inside this set . good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not likely there are fuses. Look for a model number on sides or back of the the storage drawer. There may also be a literature package affixed somewhere on the storage drawer or the back of the unit.
I remember Jvc put out a service document about changing 2 transistors in the power supply..they are surface mount on the solder side of the pcb. You might not find the parts anymore unless your very tech saavy. Sorry man..
bad gas...this "new gas" will last a few months. take the tank off, drain old gas out. if that doesnt solve it, the problem is in the carb. it will need to be taken apart and cleaned. next time use a product like staybil mixed in the gas, if its going to set for more than a month.
you need to replace the flyback which is flyback 259296 and also capacitor CP150 and CP114. You can get replacement parts at the following link and they include free step by step instructions with pictures so you can easially repair the set yourself. Heres the link. http://servicemanuals.vstore.ca/
×