How to program it for tv
SOURCE: programming my RCA D770
Go to this link. Copy and paste the whole link this will get you going. JR57Gard
SOURCE: Philips Magnavox MRU2600 Remote Control with RCA TV (cable)
0704,0002,0406,0007,0011,0611,0811,0312,0514,0720,0102, 0502,0601
08 17,0917,0835,0901,0103,0803,0211,0912,0114,0519,0320,0420
Estos son todos buena suerte.,
SOURCE: RCA D770 dont know how to program--lost manual
Check this link to Wiki,
http://wiki.answers.com/Q/How_do_you_program_an_RCA_d770_universal_remote_if_you_don't_have_a_code_search_button
http://download.ethomson.com/english/RCA/ACCESSORIES/IB/D770.pdf
I had trouble with the ethompson link
Turn on device.
Press and hold the button for device you want to program ( TV etc),
press the on/off button and hold until the LED turns on, and then release both buttons.
Then, point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing. If the device does not turn off, then continue to press play and wait the required interval (for a maximum of 20 times) until the device turns off.
When the device turns off, stop pressing play.
Press REVERSE, wait two seconds and continue doing this until the device turns back on.
To finish programming, press and hold STOP until the LED turns off.
I had trouble with the ethompson link
SOURCE: cannot program new phillips remote to rca tv
[http://voxrightnow.custhelp.com/cgi-bin/voxrightnow.cfg/php/enduser/std_adp.php?p_faqid=1769&p_created=1209688350&p_sid=6-sdxLAj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9ODE4LDgxOCZwX3Byb2RzPTE1OCZwX2NhdHM9MCZwX3B2PTEuMTU4JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1yY2Egc3lzdGVtIDUgcmVtb3RlIGNvbnRyb2w*&p_li=&p_topview=1] follow this web link it will take you to the RCA customer support web page for programming universal remote controls and lists codes under system components. The television codes for the universal remote are listed under TV. This web page should be able to help you solve your problems with the programming of the universal remote control and give you the codes needed to use it with the components in your system. Thank you for using FixYa and have a nice day!
Go to this link. Copy and paste the whole link this will get you going.
JR57Gard
1,067 views
Usually answered in minutes!
need the codes and how to program them, lost manual
I just want to know HOW to program it..I have the codes
What are the remote codes for the RCA D770 Universal Remote Control?
How to program the codes
×