Question about Maytag Dependable Care LAT9706

2 Answers

Washing Machine Stopped Working

My washing machine stopped working in the middle of the spin cycle. It now makes the noise as if it were spinning but it does not spin. When it went out it smelt like a belt was burning. From what I have found it there are no builts in a washing machine. Any suggestions for me?

Posted by Beth Wilson on

  • brownie50 Dec 11, 2007

    My problem is simular, stopped spinning and a loud whinning noise occured. It however has no belts - direct drive. Kenmore Model 110.2092290. The machine was emptied of the wash load, turned back on and still loud whiining noise.

  • neka69 Mar 07, 2008

    my H2 washing machine stop working? It doesn't make any nosies...simply will not come on. What can I do 2 fix it by myself? I have been using regular wasinhg powder and have cleaned it with vinager 1already this year. Do you know something else 2 do?

×

Ad

2 Answers

Anonymous

The wash cycle doesnt work

Posted on Sep 15, 2008

Ad
Ron Marek

Ron Marek

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 878 Answers

Hi Beth, sounds like you broke a belt. You can verify this by pulling the washer away from the wall and tipping it back to look underneith. Should have two belts, pump and drive. The part numbers are 211124 pump and 211125 drive. Catriver, post back.

Posted on Aug 02, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GLEH1642DS1 FRONT LOAD STACKABLE WASHER MAKING LOUD THUMPING NOISE IN SPIN CYCLE & SQEALS WHEN i STOP IT
Sounds like you have an unbalanced load. I know this sounds too easy but lots of times this is the issue. If it doesn't help then you could have a bearing issue where the belt goes around a pully under the tub itself. If so you will have to replace the pully itself and perhaps the belt if it's gotten worn too much.

Nov 15, 2013 | Washing Machines

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired
Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer flashed f-21/ stopped in the middle of cycle and will not spin out h2o. if a new cycle or the spin cycle is started, the drum does not move and the washer makes a loud humming noise.
You have to call the serviceman

Aug 11, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Loud screeching noise when spin cycle is on
Good morning! Possibly the noise was due to improper placement of load into the spinner which should be within its capacity load. best regards.

May 02, 2009 | Washing Machines

1 Answer

Spin mode does not work
Dear "FixYa,"

I have fixed the problem with my washer.

I started clothes washing machine with one load of clothes.
Wash and rinse process completed, as it came to spin,
Machine stop, only I heard was running motor. I opened
machine and found coupler is cracked (broken) and was
unable to rotate the gear.

I replaced new coupler and machine started to work normal.

Thank you
Kanu

Apr 18, 2009 | Whirlpool Washing Machines

2 Answers

Washer won't agitate or spin out.
Well it is ethier Belt, Cluch ,motor ,Or transmission. But it does sound like your transmission . The loud clunk is the brake in the gear case ( Trans.). It might have broken off.

Apr 05, 2009 | GE WJSR2070B Top Load Washer

1 Answer

WASHING MACHINE NOT SPINNING
belt broken

Jan 11, 2008 | Zanussi FJS1225W Front Load Washer

1 Answer

Washer make a grinding noise in the spin cycle; barrel does not spin in spin cycle
check the transmission out or it can be a clutch problem

Nov 03, 2007 | Westinghouse WWS833ES Super Capacity Top...

2 Answers

My frigidaire washer want spin
Sounds like the lid switch may have went bad. It has an independent drain pump so will still drain water. Give that a try and see. Godd Luck!!! Jim

Sep 14, 2007 | Washing Machines

1 Answer

Spin Cycle/Machine makes noise and moves
You can't tight up the tub. You should replace the damper pads that located beneath main support housing on base's machine. Goog luck !

Jan 15, 2007 | Crosley CAWC529JQ Top Load Washer

Not finding what you are looking for?

View Most Popular

Dependable Care LAT9706

  • Washing Machines

Related Question

GLEH1642DS1 FRONT LOAD STACKABLE WASHER MAKING LOUD THUMPING NOISE IN SPIN CYCLE & SQEALS WHEN i STOP IT

  • Washing Machines

Open Questions:

0 Answers

Why does Maytag Dependable Care quiet pack 8 cycle washer rock and leak during spin cycles? rocks and leaks during spin cycles

Jul 25, 2014 | Maytag Dependable Care LAT9706

0 Answers

I have a maytag dependable care quiet pack heaqvy duty 2 speed super capacity 9 cycles washing machine. I did one load this morning, and when I put in the second load (this one consisting of towels), 20 minutes later, now there isn't anything noise from the timer, i think soemting died, I pull the knob and push the knob, but there is no response from the machine.

Aug 28, 2012 | Maytag Dependable Care LAT9706

0 Answers

lat9706 leaks We have a Maytag Clothes Washer model LAT9706AAE and we seem to have water leaking. The input hoses are OK and the drain hose shows no sign of leakage. The tub fills OK. Is it possible that the tub is overfilling or splashing out when it spins Water seems to come from under the unit but not a flood of water.

Feb 20, 2012 | Maytag Dependable Care LAT9706

0 Answers

Maytag washer, model #LAT9334 vibrating badly on spin cycle. The washer is leveled. Tested a quick run empty, it is even worse.

Apr 19, 2011 | Maytag Dependable Care LAT9706

See all Maytag Dependable Care LAT9706 Questions

Related Topics

Washing Machines Logo

2,002 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

8 Answers
Washer leaking water from bottom

Maytag Atlantis MAV6000 Top...

28 Answers
Maytag Neptune Error COde "nd"

Maytag Neptune MAH9700 Front...

3 Answers
Want to disengage lid lock on maytag centennial

Maytag Centennial 3.2 cu. ft....

4 Answers
Maytag 2000 series shows error code f6 e1. How can I fix?

Maytag MHWE200XW Washer

12 Answers
How to replace Maytag Washer belt

Maytag SAV5710 Top Load Washer

Top Maytag Washing Machines Experts

Sheldon Dedek

Level 3 Expert

912 Answers

Brad Brown

Level 3 Expert

18596 Answers

jdthefixer

Level 3 Expert

747 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...