At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
open the capsule and pour the contents onto a plate
place it in a line and divide the line evenly into 3 portions
each portion will be 58 mg which will be ok as dosage is on dogs weight add the powder to the food save the rest till next dosage time and divide the rest in 1/2 and feed 1 portion ,leaving the last portion for the next dosage time
you have to open the back cover to check weather the screen back light need replacement. usually if the lamp is almost black in color it needs replacement. the backlight is covered with metal shield installed at the upper portion and lower portion of the panel of the tv.
there may be dust behind the screen & also on the reflecting glass. u will see that upper back portion cover is removable. remove it & see that glass there is glass on inner side of cover. clean it, also clean the screen. u will see there are 3 picture tubes faces on bottom side, clean all of them.
if it does not work then u can increase brightness of tv by increasing "screen" control of tv which is on the lower back portion of tv. this can be done by any tv repair expert only.
First check what color of faint lines comes then reduce Screen Volts in TV of that CRT (tube) Take off lower front cover, speaker grille of TV, there you will see focus control block that has 6 control knobs, upper 3 knobs are focus adjustment of red-green-blue CRTs and lower 3 knobs are screen volt controls for red-green-blue CRTs. Turn screen volt control knob CCW to reduce screen volts of desired CRT. Put TV on any free AV input so screen will be dark enough to adjust screen volts. Thanks.
Unfortunately there isn't any way to repair your tv as the magnet has distorted the tube that is in the tv and with CRT becoming obsolete the repair is likely to be very costly so probably your chaepest option is to buy a new tv .
I see on the form that some of you have the cannon ntsc zr 85
I also have this cam corder when I turn it on I
have a black screen both on vido and card can not see
nothing play back is all right or what is on the
tape on the screen in the lower left hand bottom
corner is the word FERNAN what the heck is that
like another person on hear I thought I pushed
the rong button any one help love to hear from you
thanks tom [email protected]
1.Are these lines only in the upper 1/3 rd portion of the screen?And is there a clear demarcation between this area and the lower portionb, where the image is perfect?
2.Or is thin Horizontal lines evenly spaced around an centimetre apart?
If it is the first case, then there si a problem with your TVs SMPS. It is not generating the required regulated 110V required for the TVs functioning.
If it is case 2, then there is a simple adjustment at the back - 'SCREEN'. This adjusts the Screen Grid Voltage, and by slightly lowering it, this problem will go away.
×