Televison & Video Logo

Related Topics:

Question about Televison & Video

2 Answers

Hitachi LCD TV looks like no power but power cord checks good

I have checked the power cord. Good. Tested the pushbutton power switch. Good but still no red licht. Tested the 3 amp input fuse to power supply. Good. If I need a power supply where can I get it.

Posted by Terry Lambert on


2 Answers

The Knight

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Televison & ... Master
  • 76,851 Answers

Eventhough the fuses and power cord os good, and there is no power light on the panel board, means the power board do not get power to it. Check an other power outlet point first. If it does not help you, soethnig wring with the power regulator baord. Normally, these board are irreparable, and replacement should be done as card basis. OK.

Posted on Feb 08, 2012

Testimonial: "I just got done checking all the outputs (didn't have a proper meter before) from the power board. You are absolutely's toast. Now I am trying to find out where to get one. It's Ironic that I live in Japan but have to search the US for the part. Even though it's a Hitachi, it is considered a foreign TV here based on the model number. Thanks."



  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No power

Posted on Dec 09, 2012


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


I have a Hitachi HDB70-S tv. It was switched off at the mains and switched back and I now have no picture or sound

If power was disconnected with the set either on or off when it returned (the power) the surge may have got the fuse that is inline with the power cord or even damaged the power supply board in the set.

I would look first at the fuse and take it from there if the fuse turns out to be good.

Someone cut off the power cord for my Hitachi 51f710s and not certain where the power supply is

That one I am fairly sure had a plug on cord---look where opening for cord is and inside for two metal pins in a socket---rectangular with white plastic.

Where can I order a US power cable for a 32LD7800 Hitachi TV

Get into this link and see the suitable power cord top, to suit to your hoouse power socket. Then look at the abck of your Hitachi TV power in socket. Compare these and buy one. There is no special specifications. Choose a good quality one of a reputed company. That is all. OK

Hi there i replaced my hitachi 53uwx10ba convergence IC (2) stk392-120 and now it won't turn on and just flashes at the front panel 7 times, can i get some help pls

Did u check the pico fuse and all those resistors on the tv convergence board to make sure with ones are good resistors which are not good resistors and replace all them resistors too?U didn't do that should get it tested and replaces all those dying resitors.Try website like look up ur Hitachi tv model what resistors and pico fuse u require to check.

Hitachi , L32A01A , LCD, sound but no picture Need service manual or solution to issue BTW. I hate Hitachi. Have a 42 inch Hitachi Plasma (4 years old) screen separation and now the 32" LCD 1 just a...

hi, try these steps...

Use the source button to ensure that source is not set to the wrong input.

Try unplugging power cord for ten minutes, to ensure it is not a setting problem.

Check all the video cables at the back of TV.

Check Light /Color settings.

If problem persist and does not depend on external receiver or settings, then it is likely an internal fault.

If it has sound but no picture then one of the following parts is faulty, and must be tested and replaced:

The inverter is the high voltage board that provides variable power to the backlight lamp. This is the most common. When inverter is faulty you can get no picture, or a very dim picture that can only be seen by pointing a torch light with a 45 degree angle on the LCD surface from very near distance.
The inverter must be tested by reading voltages with a multimeter.

The LCD ribbon cable/LCD display and connectors.
This is quite uncommon, but happens. If the TV had been hit or moved the LCD cable may have slipped out, or the LCD connector may be damaged.

The LCD controller board.
This is the board that controls the video signal, it is difficult to test, as there is need to read determined values on IC pins. To test this board you need to purchase a service manual and follow the troubleshooting diagrams on service manual.

Input/Output Signal boards.
This are the boards where you connect the video and audio cables, if a signal board is defective, then you may get no picture on particular inputs located on faulty board.

good luck!

Element FLX 3211B has no power after 14 months of use. TV will not power on. Checked th fuse near the power cord and the fuse is good. There is no power going to the TV. Tested the power cord and it is...

Took it to a TV repair shop and they did the following:

1. Rebuilt Power Supply
2. Replaced Diode
3. Replacd Transitor

Total cost was ~$100. Tv works fine now.

No power to my Hitachi 42Pd6600 plasma tv

the master switch at the bottome of the TV per Brianbuy solved my problem...Thank you!

Can not change channels on TV

Good Day;

To reset the TV unplug power cord from the wall for 2 to 5 minutes then plug back in.

Good Luck, big IRISH.

Will not turn on blue light comes on but then goes off and red lamp light stays on

Good Day, ebfmays;
Check the lamp and (reboot) reset the TV by unplugging A?C cord from source wait 3 to 4 minutes then plug cord back in.
Good luck, big IRISH.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Cindy Wells

Level 3 Expert

6555 Answers


Level 3 Expert

85241 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides