Have a 32 curtis flat screen when i moved the colour button got changed cannot change on remote the tint button how can i fax this

It will be active only when NTSC program is received.

I think i may need a new power cord for my 32 inch curtis. where would i be able to get a replacement?

For my Samsung its the content button on the remote, then under channel manager you move to highlight ALL channels and add the ones you want.

You can get a general purpose "universal remote" and program it but difficult and tough to get all of the functions to work. I would recommend stepping up the price paid for a remote to around 100 - 120 dollars. The one I recommend is the URC remote. This one can be programmed with multiple components to a single button. There are many out there other than URC but it is one the I use and have found to be very reliable.

PLEASE CLERIFY ARE YOU USING COMPONENT CABLE OR COMPOSITE .DID YOU TRYED TO CONNECT TO DIFFERENT TV WAS IT FINE .

Since you do not provide the make and model number of the TV so we can look for the user manual for you to read on how to make adjustment to your TV.
You just have to get to the MENU button on the remote for the ON screen setup menu and look for Picture adjustment set up to adjust the Pictures.
It should show Brightness, Contrast, Tint, Color adjustment choices.

Look for the manual control button the said INPUT.Pushes couple times,now u will move within HDMI modes like 1,2,3.

turn TV on, let the Tv cycle through the three colours, then using the remote press the menu button followed by the standby button. press standby button again and it all comes up working.

andy

llevalo a un tecnico



you are a DUMMY

You have a bad connection on the CRT board thats mounted on the end of the picture tube it sounds like, or the socket on that board that plugs into the TV set is intermittant or has a bad solder connection on it. Good Luck