Question about Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

1 Answer

Bosch classixx dishwasher wont drain

Has removed filters and cleaned them, checked outlet hose is clear. runs normally until it comes to drain and then stops

Posted by kubbard on

Ad

1 Answer

Dieter King

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ive had this happen on mine too. remove the filters in the bottom. squirt washing up liquid into the space-- liberally dont be shy!
Boil pans of water, boil the kettle. pour water into the space where the filters normally are. Fill the base of the dishwasher completely. Next close the door and repeatedly use the Reset feature. Eventually the pump will clear and kick back into life. Its a build up of fats, and sludge that causes the pump to appear to seize--the washing up liquid and boiling water see to that.

Posted on Feb 05, 2012

Ad

3 Related Answers

Anonymous

  • 105 Answers

SOURCE: bosch classixx dishwasher not draining

try removing pump some models can be serviced fron inside well of machine glass can stop the pump from turning
clean out water and remove filters find a screw in base of well remove and remove pump housing check with torch to see if any obstuctions there if not see if the impellor moves around when turned and make shure that the pump is not worn out

Posted on Feb 24, 2008

Ad
ginko

Ginko

  • 19396 Answers

SOURCE: Bosch shv56c03uc/114 Water is not draining

Check drain hose first.

If you do not find any blockage, then you will need to access the pump, remove pump hose and look for blockage in there.

If there is no blockage at all, then either the water level switch, a faulty pump, a wiring problem, or a faulty timer board can be cause the machine not draining.

Posted on May 21, 2009

bosch guru

  • 457 Answers

SOURCE: Bosch Classixx Dishwasher stck in one program

the module must be changed. let me know what happens. im a old bosch tech

Posted on Feb 26, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I resolve f17 error message on bosch classixx 7


F17 is a time out fault on drain pump. Check all water hoses and drain pump for either blockage or restriction. Failing that, check your waste pipe is clear.

May 29, 2014 | Bosch 24 in. SGS43C12 Classixx...

1 Answer

Bosch classixx dishwasher sgs43c12 not draining.


The only way to eliminate a pump issue is to actually remove the pump and check it internally, it doesn't take much to block them and also the impellers can come loose, It sound like you are handy with tools so i suggest removing the drain pump and while it's off check the hoses that run to and from the pump for obstructions and make sure the impeller is not loose.

Mar 05, 2012 | Bosch 24 in. SGS43C12 Classixx...

1 Answer

My Bosch Classixx (about 10 years old) dishwasher won't fill The problem has only started since I pulled it out and cleaned! The programme sounds are as normal but no water enters the machine. I detected...


Check you dont have a small inline filter inside the inlet water pipe. Either at the "tap" end or can be on the machine itself. They look like a small sieve. Remove it and clean with a toothbrush. Then put back.

Apr 05, 2017 | Bosch SHU9915UC Dishwasher

1 Answer

Bosch SGS43C12 dishwasher fills with water as normal at start of programme, then you can hear a quiet 'click click' normally the cycle would start, but nothing happens. I can press reset and it drains the...


Where does the clicking sound seem to be coming from? Start the machine and when it's filled with water, try to identify where the clicking noise is emanating from. I suggest putting you ear next to the programme selector and start/stop switch and see if you can hear it more loudly/clearly.

Sounds like a faulty control module to me. Try the above and report back . . .

Oct 11, 2010 | Bosch 24 in. SGS43C12 Classixx...

1 Answer

I have a bosch dishwasher classixx its less than a year old, the 'check water' light comes on and it doesn't complete the cycle. Water is left in the bottom unable to drain away. I have checked pipes as...


if its less than a year old why dont you contact the manufacturers service team it will still be under guarantee as the bosch guarantee is 24 months
you can dowload a copy of the instruction maual free of charge from the bosch or bsh home appliances web site

Feb 21, 2009 | Bosch 24 in. SRS43C12 Classixx Slim-Line...

1 Answer

Check water light is on


I had the same problem! First disconnect mains power, then switch off the mains water to the water input hose, and disconnect the hose. Disconnect the waste outlet hose from your drainage. ( this will release some water from the hose ends, so a washing up bowl would be handy ) You will need to tip the dishwasher on to it's back, be carefull not to damage the waste outlet hose, and watch out from more water spillage. Next remove the two screws on the base metal cover, and spring out the cover from the two side clips, the cover can then be removed, you should have a screw holding an earth lead remove screw and lead from cover.
Inside the bottom of the dishwasher you will see a small electric pump fitted to the side of the dishwashers drain, it has two wires with spade connector on them, disconnect these from the pump noting colour of the wires for reassembling. The pump has the same diameter hose as the outlet hose. Next carefully remove the rubber elbow pipe from the pump and hose end this will need to be washed with clean water. Then to remove the pump, press and hold down the locking tab, where the pump is fitted to the drain, and twist the pump anti-clockwise. The pump will then release from the drain. Inspect the pump impellers for damage, and that the pump has free movement, also check condition of the rubber O-ring. Inspect inside of drain for broken bits of china and glass, remove and clean, also check the outlet hose for any blockages.
( run some water though the hose backwards from the water tap and collect it in a bowl from the pump end of the hose ) Reassembly is the reverse of the above, check electrics inside have not got wet, if ok switch on. The check water light should now be off.
Alan

Jan 11, 2009 | Bosch 24 in. SGS43C12 Classixx...

2 Answers

Water leaking from dishwasher


check the hose in the back to see if it split could be dry rotted

Jan 09, 2009 | Bosch 24 in. SGS43C12 Classixx...

1 Answer

Bosch classixx dishwasher not draining


try removing pump some models can be serviced fron inside well of machine glass can stop the pump from turning
clean out water and remove filters find a screw in base of well remove and remove pump housing check with torch to see if any obstuctions there if not see if the impellor moves around when turned and make shure that the pump is not worn out

Feb 23, 2008 | Bosch 24 in. SRS43C12 Classixx Slim-Line...

Not finding what you are looking for?
Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher Logo

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...