Need to find a part to fix my phone !where can I get it?

need to run a scan on it

Switch-off your phone. 1. Press and hold 3 keys; Green dial key, * Star key, no. 3 key on keypad and then press the power on/off to swtich on the phone. Remember, do not let go the 3 press and hold keys until you see a formatting word screen show! 2. After a few minutes when the Full phone formatting completed, your phone will back to original system and factory settting.

sir try the below
Switch-off your phone. 1. Press and hold 3 keys; Green dial key, * Star key, no. 3 key on keypad and then press the power on/off to swtich on the phone. Remember, do not let go the 3 press and hold keys until you see a formatting word screen show! 2. After a few minutes when the Full phone formatting completed, your phone will back to original system and factory settting.

Feb 27, 2010- Speed dial numbers 001 -255 (256-279 are personal speed dial entries) are system wide speed dial numbers and are changed in system programming. System programming is done on M7310,M7324 and T7316 set only.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say Terminals&Sets.
The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the next key 3 times(bottom right arrow).
The display should say Sys speed dial.
Press the show key (top right arrow)
The display should say speed dial#:--
enter in the speed dial number you wish to program.
Press the show key (top right arrow) .
The display should show the existing speed dial number
Press the chg key
Enter in new telephone number
press ok when finished
repeat for remaining speed dials
Press the release key when finished

dial *#7370#

Hello :

To fix the problem you need to restore factory settings .
Here I'll show you how : Switch-off your phone.

1. Press and hold 3 keys; Green dial key, * Star key, no. 3 key on keypad and then press the power on/off to swtich on the phone.

Remember, do not let go the 3 press and hold keys until you see a formatting word screen show!


2. After a few minutes when the Full phone formatting completed, your phone will back to original system and factory setting.

good luck .

rate if useful please !

Speed dial numbers 001 -255 (01- 70 on older versions) are system wide speed dial numbers and are changed in system programming. System programming is done on M7310,M7324 and T7316 set only.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say Terminals&Sets.
The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the next key 3 times(bottom right arrow).
The display should say Sys speed dial.
Press the show key (top right arrow)
The display should say speed dial#:--
enter in the speed dial number you wish to program(40-70) .
Press the show key (top right arrow) .
The display should show the existing speed dial number
Press the chg key
Enter in new telephone number
press ok when finished
repeat for remaining speed dials
Press the release key when finished

When on the home screen the left soft key takes you to your call history. This is divided into tabs, with the first default tab showing all calls and the other tabs showing incoming, outgoing, and missed calls. Each tab shows a chronological list of calls, displaying the phone number dialed. The currently selected item also shows the date and time of the call. The left soft key is assigned to call the currently highlighted item, while the right soft key opens a menu that provides additional functions. Data counters can be found in the phone settings, as well as total call timers and a message counter.
During a call the right soft key is assigned to end the call and the left soft key opens a menu with additional options. These options include the ability to turn the speaker phone on and off, add a call for conference calling, place the call on hold, or enable the mute function. The W580i also supports multi-tasking, so you can access other phone functions like your calendar and contacts while on a call. We found the call management feature set on the W580i to be fairly standard, with nothing that stands out, but nothing important missing, either.

when i press some keys display will off keypad lights up but the screen does not show

I just had the same problem. Try unplugging the plug from the electrical outlet for the home(base) unit and plugging back in. Fixed my problem right away.