Xinjia watch instructions

hi Claude.
Press and hold the "Adjust" button to until the "Time" digits begin to flash. Use the "Start/Stop" and "Split/Reset" buttons to set your digital watch to the correct hour and minute increments. Press "Mode" to display the "Date" setting screen.31 Mar 2015

Digital Watch Instructions ' Techwalla.com

https://www.techwalla.com/articles/digital-watch-instructions

How do u set a digital watch?In normal time mode, Hold L2 for 2 seconds to alarm time set mode, then L2 again to normal time set mode, the second digits begin flashing. Press R2 to reset the seconds to "00", press R1 to switch to the minute digits. Press R2 to advance the minutes. Press R1 to switch to the hour digits.4 Button Digital Watch - Dakota Watchhttps://www.dakotawatch.com/PDF_FILES/Digital.pdfSearch for: How do u set a digital watch?

how to set digital wrist watch Google Search

press the light button

Change time. It will alternate between 12 hours and 24 hours.

The manufacturer's web site is oriented towards sales (in commercial quantities), so I couldn't find any instructions list.

Since most electronic watches operate in a similar manner, try a little experimenting.

To change the settings on a watch you need to enter the settings menu. This is done by pressing the "mode" button (often on the lower left) and using the buttons on the right to change the setting in the display.

Each time you press the mode button the display will step through the setting menu and when you have finished, keep pressing the mode button until the mormal timekeeping mode is displayed.

E.g. press the mode button until the present time on the watch face is showing and then experint with the other buttons on the watch to adjust it.

Have patience.

Good luck!

Hi need to get a date change although I have the instructions it's all about the buttons that's it sooooooo please help me plus I need to stop it from beeping every hour

to turn the alarm off you have to press the reset button and hold it while pressing the satrt/stop button

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all INVICTA watch manuals. Rate me, please .

I have the same problem with the xinjia-686. These instructions posted for another digital sports watch worked for me.

davidtolond
Rank: Guru Expert
Rating: 85%, 400 votes
I have the AW21312W, which has 4 buttons:

1. Light (Top left)
2. Mode (Bottom Left)
3. Start/Stop (Top Right)
4. Lap/Reset (Bottom right)

To turn the set alarm off, push buttons 3 and 4 at the same time, the alarm icon should appear or disappear

To turn off the hourly chime, press button 4. While holding it down, press button 2 and the days of the week disappear. The chime is now off. If you want the chime, press button 4 and hold while you press button 2. When all the days show, the chime is on.

you press the start button and reset contemporanelly . hello matteo

I found users instructions on roxy website at:
http://www.roxy.com/search/index.jsp?f=Taxonomy%2FROXY%2F2818169&categoryId=2818071&f=Taxonomy%2FROXY%2F2818071&fbc=1&fbn=Taxonomy|Watches&fbx=0

We were able to program our watch completely!!!

If you look on the back of the watch that you bought on the metal plate, it tells you the style. Ours was the Roxy 70's digital watch, and I found specific instructions at (even if this is not your style, the instructions may work):
http://www.roxy.com/graphics/uc/roxy/manuals/Roxy_manual_watch_70s.pdf