Question about D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n

Open Question

I can't open the dlinkap for the D-Link DAP 1522

I've just purchase a D-Link DAP 1522 to use as a bridge between my Mac and Xbox but I am unable to successfully load the config page. I enter the IP 192.168.0.50 into the URL and it loads, however the page is just black and orange and is covered in 'Related Searches' and I can't actually find the Setup Wizard to link the bridge to my router (My router is a normal D-Link one supplied by Sky, unable to find the exact model at the moment) Please help! I don't want to have just wasted £80!

Posted by Anonymous on

Ad

2 Related Answers

Anonymous

  • 1 Answer

SOURCE: dlink dap 1522

I think I was having a similar problem with my DAP-1522 ... FW Version 1.10 being used as an access point. I recently discovered that I was not able to connect to the configuration pages using a web browser by typing in it's IP address (192.168.0.50). When I originally set this up device up on my network, it worked just fine, but at some point in time, it stopped working. My solution to this problem was to set the switch on the back of the 1522 from Auto to AP, then re-boot the DAP-1522 by removing power, waiting 10 seconds, then plugging power back in. Once the AP re-booted, I was then able to access the configuration login page by typing 192.168.0.50 into my browser. My DAP-1522 access point is connected via port 1 to my D-link router, a DGL-4100, via a DGS-2208, 8 port gigabit switch. Hope this helps!

Posted on Aug 31, 2009

Ad

SOURCE: I just got a dap-1360

just make sure that you belong with in the same IP range.
default DAP-1360 IP is 192.168.0.50
username : admin password :
change your PC IP address to 192.168.0.xxx (e.g. 192.168.0.2)
from there you may choose wizard or manual configuration.
you may change your DAP-1360 IP add according to your network settings in the office and you must change you PC IP address with in the same range.

Posted on Mar 24, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to assign static IP of my access point DAP 1150 to my pc


From your computer, get the MAC-address of your network adapter.
Configure the router to always give out the same IP-address for that MAC-address.

Jul 12, 2014 | D-Link DAP-1522 Xtreme N Duo Wireless...

1 Answer

192.168.0.1


If the page does not open then you don't have a connection to the router. Make sure your cable is attached to the router and computer. You can't do the initial install wireless usually.

May 01, 2014 | D-Link DAP-1522 Xtreme N Duo Wireless...

1 Answer

JE NE PEUX PAS INSTALER DAP 1360


Access D-Link's support-site: ftp://ftp2.dlink.com/PRODUCTS/DAP-1360/

Choose 'REV. A' or 'REV. B' or 'REV.C'.

Download the instructions for your router.

Feb 16, 2014 | D-Link DAP-1522 Xtreme N Duo Wireless...

1 Answer

Cannot access either dlinkap or 192.168.0.50 via web browser in order to set DAP-1360


Connect your computer to the router.
Assuming Windows 7, click the "Start" button.
Into the search-box, type 'CMD' and press ENTER.
Type 'IPCONFIG /ALL'.
Look for the IP-address of the "gateway" (or "DHCP-server").
Type that IP-address into your web-browser.

Nov 24, 2013 | D-Link DAP-1522 Xtreme N Duo Wireless...

1 Answer

Dap-1522 setup wizard


You can download the latest version of the firmware you need below. Just determine if you have dap-1522 or dap-1522 rev.B.
The serial number, hardware version/revision information, MAC address and model number, will be located on a label on both the outer box, and on the adapter itself, usually attached to the bottom of the unit. Example picture on the bottom of this page.

latest dap-1522 firmware:
ftp://ftp.dlink.com/Multimedia/dap1522/Firmware/dap1522_firmware_141b.bin

latest dap-1522 revB firmware:
ftp://ftp.dlink.com/Wireless/dap1522_revB/Firmware/dap1522_revB_FW_203b.bin

Install instructions for the firmware are on page 41 in this pdf:
ftp://ftp.dlink.com/Multimedia/dap1522/Manual/dap1522_manual_130.zip

Here is a great setup video for it:
http://www.youtube.com/watch?v=lYJPGqtyFZU

6_5_2012_5_51_34_pm.jpg

Jun 05, 2012 | Computers & Internet

1 Answer

DAP-1522 WIZARD


You can download the latest version of the firmware you need below. Just determine if you have dap-1522 or dap-1522 rev.B.

The serial number, hardware version/revision information, MAC address and model number, will be located on a label on both the outer box, and on the adapter itself, usually attached to the bottom of the unit. See the example picture on the bottom of this page.

latest dap-1522 firmware:
ftp://ftp.dlink.com/Multimedia/dap1522/Firmware/dap1522_firmware_141b.bin

latest dap-1522 revB firmware:
ftp://ftp.dlink.com/Wireless/dap1522_revB/Firmware/dap1522_revB_FW_203b.bin

Install instructions for the firmware are on page 41 in this pdf:
ftp://ftp.dlink.com/Multimedia/dap1522/Manual/dap1522_manual_130.zip

Here is a great setup video for it:
http://www.youtube.com/watch?v=lYJPGqtyFZU

6_5_2012_5_51_34_pm.jpg

Jun 05, 2012 | Computers & Internet

1 Answer

Cant open the link to setup the router


Refer to page 3 of the Quick Install Guide listed on the web site below.

There are multiple ways to configure this router and do not wish to provide HOW TO without knowing how you have it set-up.

www.dlink.com/products/default.aspx?pid=DAP-1522&tab=3

Apr 04, 2011 | D-Link DAP-1522 Xtreme N Duo Wireless...

4 Answers

Cannot connect to Dlink DAP-1522 at 192.168.0.50. Unit is plugged into home network router.


Hi. Is this to change its settings?

Plug directly in the DAP-1522.
Set your PCs network settings under TCP/IP, alternate config:
IP Address: 192.168.0.10
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.50

Give it a try.
Regards,

Nov 05, 2009 | D-Link AirPlus Xtreme G DWL-2000AP...

1 Answer

Dlink dap 1522


I think I was having a similar problem with my DAP-1522 ... FW Version 1.10 being used as an access point. I recently discovered that I was not able to connect to the configuration pages using a web browser by typing in it's IP address (192.168.0.50). When I originally set this up device up on my network, it worked just fine, but at some point in time, it stopped working. My solution to this problem was to set the switch on the back of the 1522 from Auto to AP, then re-boot the DAP-1522 by removing power, waiting 10 seconds, then plugging power back in. Once the AP re-booted, I was then able to access the configuration login page by typing 192.168.0.50 into my browser. My DAP-1522 access point is connected via port 1 to my D-link router, a DGL-4100, via a DGS-2208, 8 port gigabit switch. Hope this helps!

Aug 16, 2009 | D-Link AirPlus Xtreme G DWL-2000AP...

Not finding what you are looking for?
D-Link DAP-1522 Xtreme N Duo Wireless Bridge/Access Point (DAP-1522/B) Pre-802.11n Logo

Related Topics:

802 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Mike

Level 3 Expert

4369 Answers

k24674

Level 3 Expert

8091 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...