Question about Sharp 13VT-J100 13 in. Combo

Tv wont turn on

I believe that I screwed it up by using a remote that was for a sharp vcr player that has the tamper proof button it. i was pushing buttons on it to see if it worked but apparently i pushed the wrong buttons because the tamper proof button stays on and i cant do anything on it now do i have to get the correct remote for it now or can i use the one i have and get that tamper proof lite to quit working or what. please help bearingman

bla007 Oct 23, 2008

i purchased a remote for my tv and it worked for a while and now the tv will not turn on..a red light has come on and it is blinking right above the words TAMPER PROOF..how do i unlock it??

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
3,130 Answers

I looked this set up, and Unfortanatly there is no universal remote that will unlock the set and also theres no way to do it without the original remote. Sorry to be the one with bad news. Also the right remote is available at 1-800-remotes or http://www.remotes.com for about 52 bucks + shipping. Good Luck

1 800 Remotes Factory original replacement remote...

remotes.com

Factory Original Replacement remote...

Posted on Jul 04, 2006

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Tamper proof light blinks when I try to turn on the tv.

replace the flyback

Feb 13, 2010 | Sharp 13VT-R100 13 in. TV/VCR Combo

1 Answer

Please tell me how to turn off tamper proof on my Sharp tv/vcr combo without original remote. The remote I have doesn't have a toggle button. Thank You!

As you know, the Tamper Proof function is activated and de-activated holding the Toggle/Source/Input button for about five seconds.

If your universal remote does not have this button (under any name), then try all buttons.

Try also disconnecting power cord for five minutes, this will reset most TV functions.

If still no luck, then you will need a different remote to get rid of the function.
Try all buttons on your remote. If the Tamper Proof had been activated using this remote with this codes, then it can be turned off using the same remote.

Dec 12, 2009 | Sharp VT-G14 14 in. TV/VCR Combo

1 Answer

Remote control for Sharp TV

Hold down the tamper proof button on your remote for up to ten seconds, until the tamper proof light will blink and light will go off. This will turn off the Tamper Proof button.

Let me know how it goes.

Nov 29, 2007 | Sharp 13VT-R100 13 in. TV/VCR Combo

5 Answers

Tv stuck on tamper proof

If the TV is the same as the one that my father has, hold the tamper prof button in front the tv, and it flashes like 3-4 times. then the tamper button should be turned off.

Oct 24, 2007 | Televison & Video

4 Answers

Tamper proof when you don't have original remote

If you have a universal remote you have to hold the button that says toggle or a button equilivent to that for five seconds than the tamper proof light will turn off than you can you tv on I had to figure this out on my own.

Jun 23, 2007 | Sharp 13VT-R100 13 in. TV/VCR Combo

5 Answers

Problem with our TV - Sharp VT-G14

Try pressing and HOLDING the button on the remote for a few seconds. This button is a sort of "kid-proof" lock, to prevent curious fingers from playing with the TV.

May 16, 2007 | Sharp VT-G14 14 in. TV/VCR Combo

3 Answers

Problem

There should be a "TP" or "Tamper Proof" button on the remote for the TV. You need to press and hold this button for a few seconds. It seems the Tamper Proof mode is a child lock of sorts.

Mar 24, 2007 | Sharp 13VT-N100 Combo

3 Answers