Kodak EasyShare C330 Digital Camera Logo

Question about Kodak EasyShare C330 Digital Camera

1 Answer

LCD Screen shows Kodak Logo when turned on then goes blank.

When the camera is turned on the screen shows the Kodak logo for a second then goes blank. (No icons no nothing and I know the shutter is open.)Any/all the buttons have no effect. The camera does function (Takes pictures and the flash works. I can also tell that the buttons work.)and I know the batteries are good. I have updated the firmware. The update menu did display but as soon as the update was complete the screen went blank. Is there a way for the owner to reset the camera to the factory default settings?

Posted by Charles Gillhouse on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 215 Answers

You've probably corrupted the firmware download. If the camera is still recognized by your PC then I'd try downloading the firmware again and try to load it again into the camera. I don't wish to upset you but corrupting the firmware can in some instances make the camera unusable. Your manual should tell you if there's a reset and how to do it. Don't forget the camera's firmware can also be upgraded by loading the update onto the memory card and running it from there. GOOD LUCK BMW

Posted on Jul 03, 2006

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hello, I have a lg lcd monitor. w1941s model. when I start my computer, it work for sometime. then it goes blank showing only the LG logo. then the power button doesnot work. it hang up glowing. again

If your LCD TV or monitor has stopped working, or is displaying one of the following symptoms, then it's a candidate for some new capacitors
- Flickering screen
- Screen image disappears after several seconds
- Dim screen
- Slow start
- Power LED on, but no picture
- Unusual colors and/or lines
The primary cause of LCD TV and monitor failure is caused by faulty capacitors. You can examine the capacitors in your LCD TV or monitor and actually see if they are bad.
If they appear bulged on top, then they need to be replaced.
New capacitors will solve a host of problems in LCD monitors and TV's and will extend the life of your monitor or TV by several years.
Take it to a repair shop.
0helpful
1answer

Samsung le40d503f7w only displays samsung logo on screen for a few seconds after switching on and then goes blank

have the same problem, one or more of the flourecent light bulbs in the back panel got broken, looking for a supplier who may keep these bulbs in stock, or other wise will see if i can get a used one off ebay for spares.
0helpful
1answer

Computer screen goes blank. when I turn my computer back on the HP logo shows for a mere second than the screen goes blank again

The inverter boards on laptops are common failures. Depending on the age of the laptop it could also be related to a faulty LCD interface cable.
1helpful
1answer

I go to turn my kodak easyshare m856 on and it shows the kodak logo and music and then goes to a black screen

Here are the steps:

1. Make sure you will install a new or fully charged battery/batteries into your camera.

2. Clean the battery contacts.

a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera

3. Without the memory card,turn on your camera.

If issue persists, call 1.800.235.6325 for repair.

Thanks.

Neerak21
0helpful
1answer

Dreamcast shows logo then goes blank

Definately the DC. Try ensuring that the connections are properly made first, and if that fails, try wiping the laser lens (very carefully) and the disc with a smooth cloth.
2helpful
1answer

Camera Won't Stay On.

hi try to reset ur camera...To do such reset, turn on the camera and hold the menu button down for longer than 5 seconds. A message should hopefully come up on your LCD asking if you want to reset the camera. Select Yes....

thank u
rate me
0helpful
1answer

Screen goes blank

When you turn your camera on to the right of the view screen is the menu button if you press the far right icon it should turn your display on and off.Refer to page 21 on your owners manual.
4helpful
7answers

Camera Screen Goes Blank

tap or hit the cybershot logo. It fixed my white screen. I didnt think it would work but sure enough. My camera is working like new.
Not finding what you are looking for?

204 views

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

David Shaub

Level 3 Expert

2994 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Cindy Wells

Level 3 Expert

6490 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...