When I try to turn on my phone all it does is flash on and off and will not come on. I have tried taking the battery out and let it sit for a few minutes and over night. I have tried charging it also. I was wondering if there is a reset button or something that will get it out of this mode. It does not appear that any of the buttons are stuck. I'm not sure how this happen, all I know is that my daughter (6 yrs old) got ahold of it and did something to it. Any help would be appreciated. Thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, when a phone it is continuously rebooting, it means that memory has been affected by VIRUS.
VIRUS can damage a phone in no time. VIRUS can be caused by downloading applications on your phone through the internet, or might be from data transfer from a phone to another phone.
To remove the VIRUS, you will need to flash the phone memory. Flashing the phone will restore back the phone to it normal state.
You can use this link to see how to flash your phone
Flashing a cell phone will erase carrier data from the memory. Cellular companies can usually do this for a fee. Online buyer sites sell the software kit that will flash a cell phone from home computers.
To flash a phone you will need to rewrite the PRL file by connecting your phone to a computer with the needed equipment. Your best bet is to take your phone to a dealer that flashes phones on a regular basis. For more information
my phone is flashing memory card removed, (there is no card in this phone that I know of) turned it off and on, taken battery out but still flashing. Unable to select any menu and unable to unlock phone from holding button on screen
Hi,when a phone does not come on, it is either the battery of the phone is dead, might need to be charge or replaced with another battery.
you can use another battery to test if it is the battery the fault.
The other thing to check is if the phone memory is weak and may need to be restored back the phone memory. will need to be flashed. if too weak to power up the phone all application you downloaded on the phone has VIRUS and has affected the phone memory.
First Charge the battery for longer hours before using another battery to confirm if the battery cell is the problem.
If not battery, in think you will have to flash the phone memory for it to come back to life. You can use the link below to know about how to flash the phone.
Hi, when a phone won't turn on and blinks red light, it 's either the battery cell if too weak to power up the phone all application you downloaded on the phone has VIRUS and has affected the phone memory.
First Charge the battery forlonger hours before using another battery to confirm if the battery cell is the problem.
If not battery, in think you will have to flash the phone memory for it to come back to life. You can use the link below to know about how to flash the phone. hubpages.com/hub/How-to-Flash-your-cell-phone
You can also try to access the phone through using USB cable to connect the phone to a PC or a laptop,by installing the software of the phone so that you will be able to get access into the phone memory and retrieve lost data. Take care.
your firmware is corrupt, the only way to revive your phone is re flashing it.Its hard to do, and by doing it wrong may damage your phone. To safely retrieve your phone is let the experts do it or go to a near cell repair shop and let them help you out,
if you want to do it your self, try this
first you need is a RSD lite program or flash and back-up to flash or reformat your Motorola,
to enter the bootloader
* then the # then power button, your phone will boot to bootloader, and
you will see there the flash program of your phone,
start the program rsd lite or flash and backup then connect it to your computer VIA usb, automatically the program will detect your phone,
i prefer that you first buck up your firmware by using F&B (Flash and backup) then use RSD lite to flash your Motorola,
RSD lite its much easier to use than F&B, but for safety backup first your firmware,